628346
25
Zoom out
Zoom in
Previous page
1/40
Next page
Approx 474mm
5mm 5mm
13mm 13mm
A
DETAIL A
Carbon Road
Assembly
Plastic
Ball Link
(H0066-S)
Threaded Rod
M2.5x40mm
(HC242-S)
Plastic
Ball Link
(H0066-S)
Socket Head Cap
Screw M2.5x10mm
(HC022-S)
Finishing
Washer M2.5
(H0255-S)
Finishing
Washer M2.5
(H0255-S)
Bag 13
Socket Head Cap
Screw M2.5x10mm
(HC022-S)
Tail System
Assembly
Note: Please allow plenty of time for the glue to cure before inserting plastic ball link onto the threaded rod.
Assemble H0040-S in the boom:
Before assembling the two parts in the boom we suggest tightening the
M2.5 screws into the two plastic parts to pre-thread them. In this way
when you will assemble the tail servo it will be easier to tighten the screws
into the plastic parts. Check the tail servo can fit, if necessary carefully sand
the hole.
Attaching H0082-S to the boom:
Pre-assemble the two boom spacers H0082-S with the M3x20 socket set screw.
Insert into the boom tube completely done up.
Center the holes, then unscrew until there is contact with the walls
Lock everything with the adhesive.
Tail Boom Assembly
DETAIL A
Threaded Rod
M2.5x40mm
(HC242-S)
Red/White Tail Boom (H0440-S)
Blue/White Tail Boom (H0443-S)
Carbon Road
4x
2.5x420mm
(HC461-S)
Page 23
Chapter 13, Tail Assembly
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for SAB Heli Division GOBLIN 380 KYLE STACY EDITION at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of SAB Heli Division GOBLIN 380 KYLE STACY EDITION in the language / languages: English as an attachment in your email.

The manual is 72,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info