485241
8
Zoom out
Zoom in
Previous page
1/28
Next page
User manual
8
7. Basic Operations
7.1 Turn on STB
Firstly, press the Device’s Main Power to turn on
the unit.
If the STB is used for the first time, it will play the
first channel from the default Channel List.
Otherwise, it will play the last channel before
being turned off.
Frequently Asked Question
Q: The power of my STB has been turned on
and not in Standby mode, but the TV screen
showed nothing:
A: Make sure the TV set has been set to the
correct video input (not the TV channels). For
example, if you have connected the unit with the
Video1 input of the TV set, the TV set has to be
switched to Video1.
Q: The power of my STB has been turned on
and not in Standby mode, but the TV screen
showed nothing except “No Signal”
message.
A: This means the channel you select has no
signal. There could be several causes:
1 The channel which you select is not in your
allocated satellite. The solution is to change the
channel.
2 The signal of current TV channel is too weak.
Try to switch to other strong signal
channels. If the problems still exist, please
consult your local dealer or other professionals
for technical service.
3 You have used the Dual LNB, and need Modify
LNB Type
7.2 Standby Mode
1 Pressing Key Power [
] can enter the
Standby
mode.
2 In Standby mode, pressing Key Power again
can move back to the unit and go on playing the
previous channel.
3 Users can also disconnect the device’s main
power to end the Standby mode.
7.3 Next / Previous Channel
In full screen, press keys [,] to change
channel.
7.4 Volume
In full screen, press keys [,] to adjust
volume.
7.5 Number Keys
In full screen, use number keys and press OK on
the Remote Control Unit to change channels.
7.6 Mute
1 Press key [
] to mute the sound and the
screen will show up.
2 Press key Mute again to restore sound.
7.7 Pause
1 In playing mode, press key Pause [ II ] , and
the
picture will pause, but the sound of the channel
will still remain.
2 Press key Pause again, and the screen’s
picture will skip over to the current playing
picture, and the sound of the channel will
correspondingly play.
7.8 Recall
Press key Recall [
] will directly switch to the
previous
channel that you watch before current channel.
7.9 FAV
1 In full screen, press key [FAV] , and it will
display a window of “Favorite Group on the left of
the screen like below.
2 In the window of “Favorite Group”, you can
move highlight by pressing keys [,] then
press OK key to set favorite channel you choose.
3 Keys [,/,] can implement the
“Page up/Page down” function.
4 The favorite group is the favorite channels you
have marked in Menu “TV channel list”. Please
refer to Favorite.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for SAB 3500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of SAB 3500 in the language / languages: English as an attachment in your email.

The manual is 3,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of SAB 3500

SAB 3500 User Manual - German - 26 pages

SAB 3500 User Manual - Dutch - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info