733419
6
Zoom out
Zoom in
Previous page
1/32
Next page
4
5. Install the battery to high pressure
cleaner.
6. Press the power switch to turn on the
product.
To stop the product:
Switch off the power switch.
NOTE: The fan will keep running to cool
down the product 1 minute after the unit
has been shut off.
USE OF POTABLE WATER SUPPLY
The product can use potable water. Use
Ryobi suction hose kit and water bags for
the connection.
When connecting the product to the water
supply, follow the regulations from the local
water supplier.
CAUTION
If you connect the product to a potable
water supply, you must install a backflow
prevention device to the water supply
system. The installation should be installed
by professional service personnel and
should be accepted by the local water
supplier.
Make sure there is water in the hose and
pump before turning on the product.
WARNING
If there is no water coming out from the
nozzle, stop the product immediately using
the power switch. Working without water
may cause serious damage to the pump.
USE OF WATER BAG
The product can use a water bag as water
supply source.
To use a water bag:
1. Close the outlet valve of the water bag.
2. Remove the inlet cap and fill the water
bag. Replace the inlet cap.
3. Place the water bag at least 0.5 m above
the high pressure cleaner.
4. Connect the water bag outlet to the water
inlet of high pressure cleaner using a
garden hose.
5. Open the outlet valve of the water bag.
6. Start the product according the steps on
“To start the product” section.
WARNING
The product must be primed before turning
it on. There should be water at the pump
and high-pressure hose before turning on
the product.
It usually takes time to release the air in
hose and pump. Do not run the product
until there is a steady ow coming out from
nozzle.
WARNING
Keep the inlet valve open when the product
is running, otherwise the water coming out
will be much slower. Running the product
with insufcient water supply may damage it.
WARNING
Do not splash water to high pressure
cleaner. It may damage the electric parts
and the battery pack.
USE OF 5-IN-1 NOZZLE
There are ve spray pattern settings located
on the 5-in-1 nozzle. To select a spray
pattern, rotate the spray selector to the
desired setting.
Nozzle Application
Spot cleaning of high, hard-to-
reach areas
Removing caked-on mud
from heavy construction,
farm, or lawn equipment
Cleaning tar, glue, or
stubborn stains from
concrete
Cleaning overhead areas
Removing rust from steel
and oxidation from aluminum
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ryobi RPW36X120HI5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ryobi RPW36X120HI5 in the language / languages: English as an attachment in your email.

The manual is 7,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info