733422
25
Zoom out
Zoom in
Previous page
1/28
Next page
21
TROUBLESHOOTING
Problem Possible causes Solution
Machine does not start
Drained battery Charge the battery.
Deffective battery Replace with compatible battery pack.
Fuse has blown Bring the product to an authorized service centre for service or repair.
Fluctuating pressure
Pump is sucking air Check that hoses and connections are air tight.
Valves are dirty, worn out, or stuck
Clean and replace the part or refer to a local distributor.
Pump seals worn out
Clean and replace the part or refer to a local distributor.
Motor busses
Low voltage or low temperature Activate the trigger of the spay handle.
Machine stops
Fuse has blown Bring the product to an authorized service centre for service or repair.
Drained battery
Charge the battery.
Thermal sensor activated
Leave the pressure washer for 15 minutes to cool down.
Nozzle partially blocked
Clean the nozzle.
Fuse blows
Fuse too small Bring the product to an authorized service centre for replacement.
Machine pulsating
Air in inlet hose/pump Allow the product to run with open trigger until regular working
pressure resumes.
Inadequate supply of mains water Check that the water supply corresponds to the specications required
(see model tag). Avoid using long, thin hoses.
Nozzle partially blocked Clean the nozzle.
Water lter blocked Clean the lter.
Hose kinked Straighten out hose.
Machine often starts
and stops by itself
Pump/spray handle is leaking Contact your nearest authorized service centre.
Machine starts, but no
water comes out
Pump, hoses, or other accessory is
frozen
Wait for the pump, hoses, or other accessory to thaw.
No water supply Connect the water inlet port to a power supply.
Water lter blocked Clean the lter.
Nozzle blocked Clean the nozzle.
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ryobi RPW3600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ryobi RPW3600 in the language / languages: English as an attachment in your email.

The manual is 8,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info