557213
21
Zoom out
Zoom in
Previous page
1/309
Next page
IMPORTENT SAFETY INSTRUCTIONS
WARNING:
Read and understand all instructions. Failure
to follow all instructions listed below may result in
electric shock, fire and/or carbon monoxide
poisoning which will cause death or serious
personal injury.
READ ALL INSTRUCTIONS BEFORE USING THIS
PRODUCT
KNOW YOUR TOOL. Read the operator’s manual
carefully. Learn the machine’s applications and
limitations as well as the specific potential hazards
related to this tool.
KEEP GUARDS IN PLACE and in working order.
Never operate the tool with any guard or cover
removed. Make sure all guards are operating properly
before each use.
REMOVE ADJUSTING KEYS AND WRENCHES.
Form habit of checking to see that keys and adjusting
wrenches are removed from tool before turning it on.
TO REDUCE THE RISK OF INJURY, keep children
and visitors away. All visitors should wear safety
glasses and be kept a safe distance from work area.
KEEP THE AREA OF OPERATION CLEAR OF ALL
PERSONS, particularly small children, and pets.
DO NOT OPERATE THE ENGINE IN A CONFINED
SPACE where dangerous carbon monoxide fumes
can collect. Carbon monoxide, a colorless, odorless,
and extremely dangerous gas can cause
unconsciousness or death.
USE RIGHT TOOL. Don’t force tool or attachment to
do a job it was not designed for. Don’t use it for a
purpose not intended.
DRESS PROPERLY. Do not wear loose clothing,
gloves, neckties, or jewelry. They can get caught and
draw you into moving parts. Rubber gloves and
nonskid footwear are recommended when working
outdoors. Also wear protective hair covering to
contain long hair.
DO NOT OPERATE THE EQUIPMENT WHILE
BAREFOOT OR WHEN WEARING SANDALS OR
SIMILAR LIGHTWEIGHT FOOTWEAR. Wear
protective footwear that will protect your feet and
improve your footing on slippery surfaces.
EXERCISE CAUTION TO AVOID SLIPPING OR
FALLING.
ALWAYS WEAR SAFETY GLASSES WITH SIDE
SHIELDS. Everyday eyeglasses have only impact-
resistant lenses; they are not safety glasses.
DON’T OVERREACH OR STAND ON UNSTABLE
SUPPORT. Keep proper footing and balance at all
times.
USE ONLY RECOMMENDED ACCESSORIES. The
use of improper accessories may cause risk of injury.
NEVER STAND ON TOOL. Serious injury could
occur if the tool is tipped.
CHECK DAMAGED PARTS. Before further use of
the tool, a guard or other part that is damaged should
be carefully checked to determine that it will operate
properly and perform its intended function. Check for
alignment of moving parts, binding of moving parts,
breakage of parts, mounting and any other conditions
that may affect its operation. A guard or other part
that is damaged must be properly repaired or
replaced by an authorized service center to avoid risk
of personal injury.
NEVER LEAVE TOOL RUNNING UNATTENDED.
TURN POWER OFF. Don’t leave tool until it comes to
a complete stop.
KEEP THE ENGINE FREE OF GRASS, LEAVES,
OR GREASE to reduce the chance of a fire hazard.
KEEP THE EXHAUST PIPE FREE OF FOREIGN
OBJECTS.
Follow manufacturers recommendations for safe
loading, unloading, transport, and storage of
machine.
BE THOROUGHLY FAMILIAR WITH CONTROLS.
Know how to stop the product and bleed pressure
quickly.
KEEP TOOL DRY, CLEAN, AND FREE FROM OIL
AND GREASE. Always use a clean cloth when
cleaning. Never use brake fluids, petrol, petroleum-
based products, or any solvents to clean tool.
STAY ALERT AND EXERCISE CONTROL. Watch
what you are doing and use common sense. Do not
operate tool when you are tired. Do not rush.
DO NOT OPERATE THE PRODUCT WHILE UNDER
THE INFLUENCE OF DRUGS, ALCOHOL, OR ANY
MEDICATION.
CHECK THE WORK AREA BEFORE EACH USE.
Remove all objects such as rocks, broken glass,
nails, wire, or string which can be thrown or become
entangled in the machine.
DO NOT USE TOOL IF SWITCH DOES NOT TURN
IT ON AND OFF. Have defective switches replaced
by an authorized service center.
BEFORE CLEANING, REPAIRING, OR
INSPECTING, shut off the engine and make certain
all moving parts have stopped. Disconnect the spark
plug wire, and keep the wire away from the plug to
prevent accidental starting.
13
English
GB
F D E I P NL S DK N FIN GR HU CZ RU RO PL SLO HR TR EST LT LV SK BG
PPW-3000_25lgs.qxd 3/26/01 11:52 PM Page 13
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ryobi PPW-3000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ryobi PPW-3000 in the language / languages: All languages as an attachment in your email.

The manual is 30,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info