390830
23
Zoom out
Zoom in
Previous page
1/70
Next page
TECHNISCHE GEGEVENS
EAG-8011 EAG-8012
Afbraamschijf 115 mm 125 mm
Spanning* 230 V ~ 50 Hz 230 V ~ 50 Hz
Opgenomen vermogen 800 W 800 W
Schroefdraad van as M14 M14
Toerental bij nullast 11.000 t.p.m. 11.000 t.p.m.
Totale lengte 310 mm 310 mm
Nettogewicht 2,35 kg 2,35 kg
* Controleer het kenplaatje van het product, want de
spanning kan verschillen al naar gelang de plaats
waar het product wordt gebruikt.
Maximum omtreksnelheid van de schijf: 4.800 m/min
Rekenvoorbeeld:
4.320 = 3,14 x 125 x 11.000 / 1.000
4.320: Omtreksnelheid van de schijf
125: Schijf-diameter
11.000: Onbelast toerental van de slijper
BENAMING
1. Afbraamschijf
2. Beschermkap
3. Hulphandgreep
4. Asvergrendelingsknop
5. Aan-/uitschakelaar
6. Flens
7. Buitenflens
8. Aandrijfas
9. Speciale sleutel
10. Diamantschijf (optioneel)
11. Hendel van de vergrendeling van de beschermkap
12. Netspanningsverklikker
STANDAARD ACCESSOIRES
Hulphandgreep, sleutel.
Voor sommige landen behoort ook een afbraamschijf tot
de standaard accessoires.
TOEPASSINGEN
Gebruik uw slijper uitsluitend voor de hieronder vermelde
toepassingen:
Afbraamwerk
Snijwerk – alleen met de diamantschijf (optioneel)
GELUIDSDRUK
Het niveau van de geluidsdruk op de werkplek kan de
85 dB (A) overschrijden. In dat geval moet de gebruiker
de nodige voorzieningen treffen op het gebied van
geluidsisolatie en gehoorbescherming.
SCHAKELAAR (AFB. 1)
Om dit apparaat aan of uit te zetten schuift u de knop
van de schakelaar (5) naar voren of laat u hem los.
Als u de slijper continu wilt gebruiken, schuift u de
schakelaar naar voren en drukt u daarna op het
voorste gedeelte om de schakelaar in de AAN-stand
te blokkeren (actie A).
Om de blokkering op te heffen drukt u op het
achterste gedeelte van de schakelaar (actie B).
EEN DIAMANTSCHIJF OF ANDERE PLATTE
SCHIJF INSTALLEREN (AFB. 2A, 2C)
Bevestig de binnenflens (6), de diamant- of platte
schijf (10) en de buitenflens (7) andersom, dat wil
zeggen met het uitstekende gedeelte van de flens
naar buiten (en niet naar de aandrijfas (8)) gericht.
Controleer of de flens de schijf in de juiste stand
op de as is geschoven.
Houd de asvergrendelingsknop (4) die zich op het
tandwielhuis bevindt, ingedrukt.
Draai de buitenflens rechtsom vast met behulp van
de bijgeleverde speciale sleutel (9).
EEN AFBRAAMSCHIJF INSTALLEREN
(AFB. 2B, 2C)
Monteer de binnenflens (6) en de afbraamschijf (1) op
de aandrijfas (8) voordat u de buitenflens monteert.
Controleer of de schijf op de juiste wijze op de naaf
van de aandrijfas is ingepast tussen de binnen- en
de buitenflens.
Houd de asvergrendelingsknop (4) die zich op het
tandwielhuis bevindt, ingedrukt.
Draai de buitenflens rechtsom vast met behulp van
de bijgeleverde speciale sleutel (9).
WAARSCHUWING
Controleer nauwlettend of de schijf geen
scheuren vertoont. Vervang een gescheurde
schijf onmiddellijk.
20
NL
Nederlands
F GB D E I P S DK N FIN GR H CZ RUS PL
RO
SLO TR
HR
EAG-8011-8012_20 lgs 10/08/05 11:19 Page 20
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ryobi eag 8012 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ryobi eag 8012 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info