Manual Ryobi eag 8011 (page 8 of 70) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

391198

Zoom out

Zoom in

1/70

DESCRIPTION

1. Grinding wheel

2. Tool-less wheel guard

3. Aux. handle

4. Spindle lock button

5. Switch

6. Disc flange

7. Clamp nut

8. Spindle shaft

9. Wrench

10. Diamond blade (optional)

11. Wheel guard lock lever

12. Live tool indicator

STANDARD ACCESSORIES

Aux. handle, Wrench.

A grinding wheel is included in the standard accessories

for some countries.

APPLICATIONS

Use only for the purposes listed below:

■ Grinding

■ Cutting - for Diamond blade only (optional)

NOISE BUILD-UP

Noise (sound pressure level) in the workplace can

exceed 85 dB (A). In this case, sound insulation and

hearing protection measures must be taken by

the operator.

SWITCH (FIG. 1)

■ This tool is started and stopped by sliding and

releasing the switch (5).

■ For the convenience for continuous operation,

slide the switch along then press the front end down

to lock it (action A).

■ To release the lock, press the rear end of the switch

(action B).

MOUNTING THE DIAMOND BLADE OR OTHER

FLAT WHEELS (FIG. 2A, 2C)

■ Attach the disc flange (6), the diamond blade/flat

wheels (10) and the clamp nut (7) upside down,

the raised part of the flange does not face to the

spindle shaft (8).

■ Be sure the disc flange is properly seated on the

spindle shaft.

■ Depress the lock button (4) located on the right side

of gear case.

■ Using the wrench (9) provided, tighten the clamp nut

in a clockwise direction.

MOUNTING THE GRINDING WHEEL BLADE

(FIG. 2B, 2C)

■ Attach the disc flange (6) and the wheel (1) on the

spindle before fitting the clamp nut.

■ Ensure that the wheel (1) is correctly seated over the

boss on the disc flange and clamp nut.

■ Depress the lock button (4) located on the right side

of gear case.

■ Using the wrench (9) provided, tighten the clamp nut

in a clockwise direction.

WARNING

Check carefully whether or not there are

cracks in the wheel. Replace a cracked wheel

immediately.

TOOL-LESS WHEEL GUARD

Release the wheel guard lock lever (11) then turning the

tool-less wheel guard (2) to the desired position.

The max. turning axie is 90° on either side; otherwise the

guard can’t be locked.

OPERATING (FIG. 3)

KEEP SAFETY GUARDS IN PLACE.

NEVER COVER THE AIR VENTS SINCE THEY

MUST ALWAYS BE OPEN FOR PROPER

MOTOR COOLING.

The key to efficient operating is controlling the pressure

and surface contact between the disc and work piece.

Flat surfaces are ground at an acute angle, usually 10 to

20 degrees with the work piece. Allow the disc to reach

full speed before starting to grind. Too great an angle

causes concentration of pressure on a small area which

may gouge or burn work surface.

LIVE TOOLINDICATOR

This tool features a live tool indicator (12) which

illuminates as soon as the tool is connected to the supply.

This warns the user that the tool is connected and will

operate when the switch is pressed.

English

F D E I P NL S DK N FIN GR H CZ RUS PL

SLO TR

EAG-8011-8012_20 lgs 10/08/05 11:19 Page 5

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ryobi eag 8011 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,23 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ryobi eag 8011 Manual

Product: