Manual Ryobi eag 2023 c (page 7 of 68) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

390832

Zoom out

Zoom in

1/68

THANK YOU FOR BUYING ARYOBI PRODUCT.

To ensure your safety and satisfaction, carefully read

through this OWNER’S MANUAL and the SAFETY

INSTRUCTIONS before using the product.

INSTRUCTIONS FOR SAFE HANDLING

■ Never use the tool if its cover or any bolts are

missing. If the cover or bolts have been removed,

replace them prior to use. Maintain all parts in good

working order.

■ Always secure tools when working in elevated

positions.

■ Never touch grinding wheel or other moving parts

during use.

■ Never start a tool when its rotating component is in

contact with the work piece.

■ Never lay a tool down before its moving parts have

come to a complete stop.

■ ACCESSORIES: The use of accessories or

attachments other than those recommended in this

manual might present a hazard.

■ REPLACEMENT PARTS: When servicing use only

identical replacement parts.

ANGLE GRINDER SAFETY PRECAUTIONS

■ Check that the speed marked on the grinding wheel is

equal to or greater than the rated speed of the tool.

■ Ensure that the dimensions of the grinding wheel are

compatible with the tool and that the wheel fits the

spindle.

■ Grinding wheels must be stored in a dry place.

■ Do not store objects on top of the grinding wheels.

■ Grinding wheels must not be used for any operation

other than grinding.

■ Grinding wheels must be stored and handled with care

in accordance with the manufacturer’s instruction.

■ Inspect the grinding wheel before use to ensure that it is

not chipped or cracked. Chips or cracks can cause the

wheels to shatter, resulting in possible serious injury.

■ Ensure that the wheel is fitted in accordance with this

manual.

■ Ensure that the grinding wheel is correctly mounted

and tightened before use and run the tool at no-load

speed for 30 seconds in a safe position. Stop

immediately if there is considerable vibration or if

other defects are detected. If this condition occurs,

check the tool to determine the cause.

■ Do not use separate reducing bushings or adapters to

adapt large hole grinding wheels.

■ Check that the work piece is properly supported.

■ Use only grinding wheels approved by RYOBI.

■ Ensure that sparks resulting from use do not create a

hazard e.g. do not hit people, or ignite flammable

substances.

■ Always use protective safety glasses and ear

protectors.

■ Use other personal protective equipment such as

gloves, apron and helmet when necessary.

■ Never place the tool on the floor or other surfaces

while it is running. Grinding wheels continue to rotate

after the tool is switched off. Never touch the wheel or

place it on the floor or other surfaces while it is rotating.

■ The flange and clamp nut must have same outer

diameter.

■ Use the tool only for approved applications. Never

use coolants or water or use the tool as a fixed tool.

■ Grip the tool securely with both hands while operating.

SPECIFICATIONS

Model EAG-2023CN

Grinding wheel 230 mm (9”)

Frequency 50 Hz

Voltage* 110 / 230 V

Input 2000 W

Spindle thread M14

No load speed 6000 min.

-1

Overall length 470 mm

Net weight 6.7 kg

* Be sure to check the nameplate on the product,

because the voltage is subject to change depending

on the area in which the product is to be used.

Maximum circumferential speed of grinding wheel:

4,800 m/min.

Example of calculation:

4,695 = 3.14 x 230 x 6,500 / 1,000

4,695: Circumferential speed of grinding wheel

230: Wheel diameter

6,500: No load speed of grinder

DESCRIPTION

1. Grinding wheel

2. Tool-less wheel guard

3. Aux. handle

4. Handle lock button

English

F D E I P NL S DK N FIN GR H CZ RUS PL

SLO TR

EAG-2023CN_20 lgs 1/09/05 10:14 Page 4

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ryobi eag 2023 c in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,17 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ryobi eag 2023 c Manual

Product: