In case it does not, the easytip Z3 has an alternative
channel select function. It simulates the channel switch
function.
Step 1 Press and hold the (F) key until the LED flashes
twice.
Step 2 Enter the code 1122 (within 5 seconds). The LED
will flash twice to confirm correct input.
You can now switch the channels by pressing the
(Programme +) and (Programme -) keys.
If your remote does not work properly with these
functions, maybe the wrong code was programmed. If so
try the other codes in the code list or run the automatic
code search mode.
To deactivate this mode, repeat the two steps above, but
enter 1121 instead of 1122.
Controlling (Volume +) and (Volume -)
Since it is not always possible to adjust the volume at your
SAT receiver or video recorder, your easytip Z3 always
provides the (Volume +) and (Volume -) and Mute
functions of your TV, even if you are in the SAT or VCR
mode, therefore you don’t have to switch between TV,
VCR and SAT mode to adjust the volume.
Contacting the Helpline
The customer HELPLINE is there to assist you, however, to save
making wasted calls most common questions and problems have
been addressed in the manual. We strongly recommend you
familiarise yourself with the operation of the remote by reading
this manual in detail.
User Manual
Helpline 00800 31133113
15
GB User Manual
D Bedienungsanleitung
I Istruzioni per l’usoF Mode d’emploiNL Gebruiksaanwijzing