489765
11
Zoom out
Zoom in
Previous page
1/112
Next page
11
OPERATING INSTRUCTIONS
GB
ruwido m_8 universal remote control
We congratulate you on the purchase of a ruwido universal remote control. Your new remote control replaces the
original remote control of your TV, the remote control of your satellite receiver or DVB-T / cable box (also referred
to as STB in the following) as well as that of your Bluray or DVD player / recorder. Moreover, with your m_8 you
can also operate your audio equipment such as CD player (CD), cassette recorder (TAPE), radio or tuner
(TUNER) or an ampli er (AMP).
Read all instructions carefully and retain the instructions for reference at a later date. Further information and
additional instructions can be obtained at www.ruwido-consumer.com. If you have any questions you can call us
on the ruwido information line 00800 31133113 at any time.
You can program your remote control using the operating instructions and the associated code and brand list, via
the following methods:
a) by manual programming, by entering a four digit code from the code list,
b) by automatic programming, depending on the brand, by entering the three digit code from the brand list
c) by an automatic searching
d) or by programming the original remote control codes.
We recommend starting by using the manual programming method (a).
Inserting and replacing the batteries
Your m_8 remote control is powered by two 3-Volt lithium batteries (CR 2032). Insert the batteries in accordance
with the markings on the battery compartment. Please take extra care to ensure correct polarity. Dispose of the
old batteries in accordance with local regulations.
Note
:
Your m_8 has an internal memory to make sure that the programming is retained after changing the batteries.
We recommend that you always use new batteries. Never combine old and new batteries because the
performance of your remote control and the service life of the batteries will be negatively affected.
General information
Your m_8 is tted with a 5 second protection mechanism. When programming, you must press a button within a
period of 5 seconds, otherwise the remote control reverts back to its regular operating mode.
Note
:
A short double ash of the signal LED con rms the input, a long ash indicates cancellation.
If you enter a code number incorrectly, press any key and wait for a long ash of the signal LED. You can then
continue entering according to the instructions.
BA m_8 Universal, 135x215 mm CS6.indd 11BA m_8 Universal, 135x215 mm CS6.indd 11 11.09.2012 16:14:5111.09.2012 16:14:51
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ruwido M8 universal at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ruwido M8 universal in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Finnish as an attachment in your email.

The manual is 1,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info