489756

Ruwido Easytip 2 Manual

3
Zoom out
Zoom in
Previous page
1/21
Next page
Inserting and changing the batteries
Your easytip is powered by two (alkaline) 1.5 V batteries (IEC LR
03, AAA)
Insert the batteries following the markings in the battery compart-
ment.
After inserting the batteries, your easytip is adjusted for TV-
operation.
If the LED does not blink as usual when pressing the keys or if
the device you are controlling fails to respond from the usual
distance then the batteries must be changed.
Your easytip includes a intermediate memory which prevents the
easytip from losing its memory during the battery changing.
Please dispose batteries carefully.
Description of keys
Image
a Light-emitting diode (LED)
b Level key to switch to device level (TV and VCR)
c Number keys: 0-9
d -/--: single/double digit enter, 10, 1-
e Power/Standby on/off
f P+/P-: switch to next or previous channel
g +/- Vol: Volume control
h Mute: Sound on/off
i OK/Norm:
For TV: Reset TV set to basic settings and confirmation-key for
TV-menu
j • For TV: Using the teletext-function
k • For TV: Function of the Videotext-keys
l Menu: calls the menu-function for TV
m Info: calls the Info-function, Index, S 100
n AV: switch to the AV-channel (e.g.: VCR)
o Shift: preselection key for adjustment of brightness, color,
contrast, treble, bass, balance.
Programming easytip
Programming by Code entering
1. Switch on the device you want to use your easytip with.
2. Turn to the TV code list (other manual) and look for the name
of your device manufacturer.
3. Choose your device by using the Level key (image b) and
press the key (for about 5 seconds) until the LED (image a)
blinks twice.
4. Enter the first 3-digit code from the list with the number keys
(image c) on your remote control.
ATTENTION!
The first figure of the 3-digit cod must be entered within 5 sec-
onds of the LED (image a) blinking twice.
Otherwise the LED (image a) will flash once and you will have to
repeat the procedure from step 3.
5. After the 3-digit code has been entered the LED (image a) will
blink twice to indicate that the code has been accepted.
ATTENTION!
If you entered the first digit within 5 seconds but still see one long
flash from the LED (image a) after you have entered the code,
this means the code you entered is invalid.
In this case, repeat the procedure from step 3.
6. Now point your easytip at your device and try to operate your
device with your Easytip.
7. If your device does not react to the device code number you
entered or if it operates incorrectly, enter the next number
listed against the device manufacturerís name.
The code list shows the most common codes first.
5
English
Bedin. ET2 V1 offse seebacher 07.03.2001 10:40 Uhr Seite 5
3 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ruwido Easytip 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ruwido Easytip 2 in the language / languages: English, German, Dutch, French, Italian, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 0,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info