Manual Russell Hobbs 26080 (page 4 of 8) (English)

809153

Zoom out

Zoom in

1/8

BEFORE USING FOR THE FIRST TIME

Fill to max, boil, discard the water, then rinse. Do this twice to remove any manufacturing dust,

etc.

FILLING

1. Remove the lid.

2. Fill with at least 1 cup of water, but not above max. Never ll the kettle above the MAX

marking. Overlling can cause a hazardous situation and possible damage to the kettle.

3. Ret the lid.

• You must make sure that the lter in the lid is aligned with the spout when tting the lid. If

you don’t do this, water will build up behind the lid because it cannot be poured out

normally and this may cause the lid to come o unexpectedly.

USING YOUR KETTLE

1. Put the stand on a stable, level surface.

2. Plug the stand into the wall socket.

3. Put the kettle on the stand.

4. Move the switch to I.

5. The light will come on and the kettle will start to heat.

6. When the water boils the kettle will switch o.

7. To switch o manually, move the switch to O, or simply lift the kettle o the stand.

GENERAL

Note: When you lift your kettle, you may see moisture on the stand. This is normal and is caused

by the steam used to switch your kettle o automatically.

BOIL DRY PROTECTION

If your kettle boils dry, a safety cut-out device will automatically switch it o. If this happens,

unplug your kettle and allow it to cool down until the cut-out resets itself. Allowing your kettle

to boil dry will shorten the life of the element.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Russell Hobbs 26080 in the language / languages: English as an attachment in your email.

The manual is 0.38 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Russell Hobbs 26080 Manual

Product: