Used to select the coee strength. For Grind & Brew mode the options are:
b
normal
bb
medium
bbb
strong. Default value is
bb. For pre-ground coee mode the options are OFF or ON.
g
Number of cups that are being brewed (Grind & Brew mode only). Selects the amount of coee which will be ground based on the
amount of water in the reservoir. Options: 2, 4, 6, 8 and 10. Default values is 8.
Y
Used to set up the timer.
s
Mode select. This button selects Grind & Brew mode (display will show
g
), or pre-ground coee mode (display will show
s
).
+
Starts the brewing process.
c
Initiates self clean mode.
DISPLAY ICONS
b, bb, bbb
Shows the currently selected coee strength. For Grind & Brew mode the display shows:
b
normal
bb
medium
bbb
strong. For
pre-ground coee mode if the strength mode is set to OFF no
b
icon will be shown. If the strength mode is set to ON the display
will show
b
.
2, 4, 6, 8 or 10
Shows the currently selected number of cups being brewed (Grind & Brew mode only).
g
Grind & Brew mode selected.
s
Pre-ground coee mode selected.
CLE
c
The machine needs cleaning. Use the self clean function.
OPERATING MODES
Your coee maker has two operating modes.
GRIND & BREW MODE
This mode uses fresh coee beans to make the coee.
PREGROUND COFFEE MODE
This mode uses pre-ground coee added directly to the lter to make the coee.
USING GRIND & BREW MODE
The quality and avour of your coee is determined by the type of beans, the grind size and the brewing time. We recommend experimenting with the
grind size and coee strength button until you nd the settings that work best for you.
1. To select Grind & Brew mode, press the
s
button until the
g
icon shows on the display.
2. Fill the reservoir with the required amount of water. Note that during the brewing cycle, ALL of water you put in the reservoir will be used.
3. Open the lter compartment and place a #4 paper lter into the lter holder. Close the compartment.
4. Open the coee bean hopper lid and ll it with fresh coee beans. Don’t overll the hopper so that you can’t ret the lid. The lid seal will help to
keep the coee beans fresh between uses.
5. Turn the grind control to the required setting (l ne,
l
medium and l coarse).
6. Press the
g
button to select the number of cups you are brewing. The setting you choose will depend on how much water you have added to the
reservoir. For example, if you have lled the reservoir to the 6 cups mark, set the number of cups to 6 as well. The default setting is 8.
7. Select the desired coee strength using the
bb
button. The default setting is
bb
.
8. Press the + button to start brewing. After a short time, the grinder will operate and the light around the button will ash while the coee is brewing.
9. Once the coee is brewed, the light will stop ashing and remain lit.
USING PREGROUND COFFEE MODE
1. To select pre-ground coee mode, press the
s
button until the
s
icon shows on the display.
2. Fill the reservoir with the required amount of water. Note that during the brewing cycle, ALL of water you put in the reservoir will be used.
3. Open the lter compartment and place a #4 paper lter into the lter holder.
4. For each large cup, add 6g of ground lter coee to the lter.
The amount of ground coee you add will depend on how much water you have
added to the reservoir. For example, if you have lled the reservoir to the 6 cups mark, add 6 measures of ground coee.
5. Close the lter compartment.
6. Select the desired coee strength using the
bb
button. The default setting is OFF. Setting coee strength to ON will give a stronger brew by
slowing down the rate that water passes through the pre-ground coee.
7. Press the + button to start brewing. After a short time, the light around the button will ash while the coee is brewing.
8. Once the coee is brewed, the light will stop ashing and remain lit.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Russell Hobbs 25610-56 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Russell Hobbs 25610-56 in the language / languages: All languages as an attachment in your email.
The manual is 1,79 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.