Manual Russell Hobbs 25290-56 (page 4 of 56) (All languages)

705895

Zoom out

Zoom in

1/56

4. Remove the lid.

5. Put the ingredients into the jug. Don’t ll past the 800 ml mark. If you do, the contents may force the

lid o when you start the motor.

6. Replace the lid. Don’t operate the appliance without tting the lid.

7. Fit the cap to the hole in the lid, and turn it clockwise to lock it.

8. Put the plug into the power socket.

9. Move the speed control to the 1 or 2 position to operate your blender.

10. Move and hold the speed control in the Y position to operate your blender in short, controlled

bursts.

11. Release the control to stop.

12. To add ingredients while the blender is working, remove the cap, pour the new ingredients through

the hole, then replace the cap.

When you have nished:

• Switch the appliance o by moving the speed control to the O position and unplug it.

CARE AND MAINTENANCE

1. Switch the appliance o (O) and unplug it.

2. Wipe the outside of the motor unit with a clean damp cloth.

3. Hand wash the removable parts.

¬ You may wash these parts in the top rack of a dishwasher.

` You may wash these parts in the dishwasher.

If you use a dishwasher, the harsh environment inside the dishwasher will aect the surface nishes. The

damage should be cosmetic only, and should not aect the operation of the appliance.

BLADE UNIT

You may wish to remove the blade unit for cleaning.

1. Remove the lid.

2. Sit the jug upside down.

3. Unscrew the blade unit and lift it o.

4. Handle only the plastic – don’t touch the metal parts.

5. Lift the seal away from the blade unit.

6. Wash the seal and blade unit in warm soapy water, rinse, and air dry.

7. Replace the seal round the blade unit.

8. Replace the blade unit and screw it rmly onto the bottom of the jug.

RECYCLING

To avoid environmental and health problems due to hazardous substances, appliances

and rechargeable and non-rechargeable batteries marked with one of these symbols

must not be disposed of with unsorted municipal waste. Always dispose of electrical

and electronic products and, where applicable, rechargeable and non-rechargeable

batteries, at an appropriate ocial recycling/collection point.

For recipes, please visit http://eu.russellhobbs.com/recipes/

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Russell Hobbs 25290-56 in the language / languages: All languages as an attachment in your email.

The manual is 0,8 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Russell Hobbs 25290-56 Manual

Product: