Manual Russell Hobbs 25280-56 (page 5 of 64) (All languages)

705896

Zoom out

Zoom in

1/64

USING THE PROCESSOR

The general assembly steps are shown in gure A.

1. Lower the bowl on to the motor unit.

2. Fit the spindle to the top of the motor unit.

3. Lower the bowl on to the motor unit, then turn it clockwise to lock it in place.

4. Fit the drive shaft.

5. Fit the chopping blade.

6. Put the ingredients into the bowl.

7. Hold the lid with the tube slightly behind the bowl handle, set it on the bowl, then turn it clockwise

to lock the tab into the top of the handle.

8. Once nished, switch the appliance o (0) and unplug it.

9. Turn the jug anti-clockwise, and lift it o the motor unit.

SLICING/GRATING

The general assembly steps are shown in gure B.

1. Lower the bowl on to the motor unit.

2. Fit the spindle to the top of the motor unit.

3. Lower the disc over the top of the spindle with the slicing or grating side facing upwards depending

to whether you want to slice or grate the ingredients.

4. Hold the lid with the tube slightly behind the bowl handle, set it on the bowl, then turn it clockwise

to lock the tab into the top of the handle.

5. Remove the pusher, and drop the ingredients down the tube.

6. Replace the pusher, and use it to push the ingredients gently down the tube.

• Don’t use ngers or cutlery to push food down the tube – only the pusher.

• Don’t let the bowl get more than about half full – stop and empty it.

• To remove the lid, turn it anti-clockwise to unlock it, then lift it o.

CARE AND MAINTENANCE

1. Switch the appliance o (0) and unplug it.

2. Wipe the outside of the motor unit with a clean damp cloth.

3. Hand wash the removable parts.

4. If you use a dishwasher, the harsh environment inside the dishwasher will aect the surface nishes.

5. The damage should be cosmetic only, and should not aect the operation of the appliance.

` You may wash these parts in a dishwasher.

RECYCLING

To avoid environmental and health problems due to hazardous substances, appliances

and rechargeable and non-rechargeable batteries marked with one of these symbols

must not be disposed of with unsorted municipal waste. Always dispose of electrical

and electronic products and, where applicable, rechargeable and non-rechargeable

batteries, at an appropriate ocial recycling/collection point.

For recipes, please visit http://eu.russellhobbs.com/recipes/

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Russell Hobbs 25280-56 in the language / languages: All languages as an attachment in your email.

The manual is 1,02 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Russell Hobbs 25280-56 Manual

Product: