Manual Russell Hobbs 25090-56 (page 5 of 80) (All languages)

705935

Zoom out

Zoom in

1/80

• Check that there’s water in the reservoir.

1. Hold the iron close to (but not touching) the fabric.

2. Press the

button.

• Leave 4 seconds between shots, to let the temperature build up.

AFTER USE

1. Unplug the iron.

2. Open the water inlet cover.

3. Hold the iron over a sink, turn it upside down and drain the water from the reservoir.

4. Close the cover.

5. Sit the iron on its heel. Leave it to cool down completely.

6. When it’s cold, wipe o any moisture, and wind the cable round the heel.

7. Clean the outside surfaces of the appliance with a damp cloth.

8. Remove spots from the soleplate with a little vinegar.

9. Store the iron on its heel, to avoid corrosion and damage to the soleplate.

SELF CLEAN

To avoid scale build up, use the self clean function at least monthly in normal water areas, more often in

hard water areas.

You’ll need a basin or a large bowl to catch the water coming out of the soleplate.

1. Fill the reservoir to the max mark.

2. Set the steam control to S.

3. Stand the iron on its heel.

4. Plug your iron in and wait for the light to stop ashing and stay on.

5. Hold the iron over the basin or bowl, with the soleplate down.

6. Move the steam control past n to C and hold it there.

7. Gently move the iron to and fro, over the basin or bowl.

8. Water and steam will wash scale and dust through the soleplate, and into the sink.

9. When water and steam stop coming from the soleplate, release the steam control.

RECYCLING

To avoid environmental and health problems due to hazardous substances, appliances

and rechargeable and non-rechargeable batteries marked with one of these symbols

must not be disposed of with unsorted municipal waste. Always dispose of electrical

and electronic products and, where applicable, rechargeable and non-rechargeable

batteries, at an appropriate ocial recycling/collection point.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Russell Hobbs 25090-56 in the language / languages: All languages as an attachment in your email.

The manual is 1,06 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Russell Hobbs 25090-56 Manual

Product: