705918
4
Zoom out
Zoom in
Previous page
1/48
Next page
4
7. Put the plug into the power socket.
8. Turn the speed control to the speed you want (1 = low, 2 = high).
9. Turn the speed control back to O to turn the motor o.
Generally, large quantities, thick mixes, and a high ratio of solids to liquids require longer timings and
slower speeds.
Smaller quantities, thinner mixes, and more liquids than solids require shorter timings and higher
speeds.
Turning the speed control anti-clockwise to Y will give you a short burst at high speed. In this
direction, the knob is spring-loaded. When you let go, it’ll return to O.
To add ingredients while the blender is working, remove the cap, pour the new ingredients through
the hole, then replace the cap.
Check that the added ingredients don’t increase the volume in the jug past the 1500ml mark.
When you have nished:
1. Switch the appliance o (O) and unplug it.
CARE AND MAINTENANCE
1. Switch the appliance o (O) and unplug it.
2. Wipe the outside of the motor unit with a clean damp cloth.
3. Hand wash the removable parts.
¬ You may wash these parts in the top rack of a dishwasher.
` You may wash these parts in the dishwasher.
If you use a dishwasher, the harsh environment inside the dishwasher will aect the surface nishes. The
damage should be cosmetic only, and should not aect the operation of the appliance.
BLADE UNIT
You may wish to remove the blade unit for cleaning.
1. Remove the lid.
2. Sit the jug upside down.
3. Unscrew the blade unit and lift it o.
4. Handle only the plastic – don’t touch the metal parts.
5. Lift the seal away from the blade unit.
6. Wash the seal and blade unit in warm soapy water, rinse, and air dry.
7. Replace the seal round the blade unit.
8. Replace the blade unit and screw it rmly onto the bottom of the jug.
ENVIRONMENTAL PROTECTION
W
To avoid environmental and health problems due to hazardous substances in electrical and
electronic goods, appliances marked with this symbol mustn’t be disposed of with unsorted
municipal waste, but recovered, reused, or recycled.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Russell Hobbs 24720-56 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Russell Hobbs 24720-56 in the language / languages: All languages as an attachment in your email.

The manual is 0,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info