705915

Russell Hobbs 24690-56 Manual

3
Zoom out
Zoom in
Previous page
1/48
Next page
3
Read the instructions, keep them safe, pass them on if you pass the appliance on. Remove all packaging
before use.
IMPORTANT SAFEGUARDS
Follow basic safety precautions, including:
This appliance can be used by persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if they have been
supervised/instructed and understand the hazards involved.
Children must not use or play with the appliance.
Keep the appliance and cable out of reach of children.
Misuse of the appliance may cause injury.
Unplug the appliance before assembly, disassembly, or cleaning.
Don’t leave the appliance unattended while plugged in.
If the cable is damaged, it must be replaced by the manufacturer, its
service agent, or someone similarly qualied, in order to avoid hazard.
H Don’t put the handle in liquid.
• Don’t use the wand in hot oil – even moderately hot oil can cause a nasty burn.
• Don’t try to chip ice, don’t try to chop raw meat, and take great care with the blades.
• Don’t t an attachment or accessory other than those we supply.
• Don’t use the appliance for any purpose other than those described in these instructions.
• Don’t operate the appliance if it’s damaged or malfunctions.
• If blending hot liquids in a pan, always remove the pan from the heat and allow it to cool down a
little before blending.
• Never leave the blender resting in the pan because the bottom of the pan could still be very hot and
damage the blender.
• Don’t run the motor continuously for more than30 seconds, it may overheat. After 2 minutes
• switch o for at least 2 minutes, to recover.
HOUSEHOLD USE ONLY
DIAGRAMS
1. Low
2. High
3. Handle
4. Wand
5. Beaker
FITTING/REMOVING ATTACHMENTS
1. Unplug the appliance.
2. To t the wand, push it on to the end of the handle, and turn it clockwise.
3. To remove the wand, turn it anti-clockwise, then pull the wand o the handle.
USING
1. Put the plug into the power socket.
2. Press the top button for low speed, release it to switch o.
3. Press the bottom button for high speed, release it to switch o.
• Generally, large quantities, thick mixes, and a high ratio of solids to liquids require longer timings and
slower speeds.
GB
DE
FR
NL
IT
ES
PT
DK
SE
NO
FI
RU
CZ
SK
PL
HR
SI
GR
HU
TR
RO
BG
AE
3 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Russell Hobbs 24690-56 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Russell Hobbs 24690-56 in the language / languages: All languages as an attachment in your email.

The manual is 0,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info