Manual Russell Hobbs 24390-56 (page 4 of 76) (All languages)

704339

Zoom out

Zoom in

1/76

BEFORE USING FOR THE FIRST TIME

Fill the reservoir to the max mark, and run the appliance without coee.

FILLING

1. Remove the carafe from the hotplate.

2. Open the lid.

3. Fill the reservoir with the exact amount of water required. Note that the brewing process will use all

of the water that you put in the reservoir.

4. Make sure that the lter holder is pressed down all the way into position. It will click when correctly

installed.

5. Put a #4 paper lter into the lter holder.

6. The reservoir is calibrated to give 10 large cups (at 125ml per cup) and 15 small cups (at 83ml

per cup). For each large cup, add 6g of ground lter coee and for each small cup add 4g.

7. Close the lid.

8. Replace the carafe on the hotplate.

SET THE CLOCK

It isn’t neccessary to set the clock to use your coee maker but you will need to set it if you want to use the

timer functions.

1. Put the plug into the power socket.

2. Use the hr and min buttons to set the correct time in 24 hour format.

• The clock will retain its settings until the coee maker is unplugged.

• To change the time, press the T button. The time will ash. Use the hr and min buttons to set the

new time. If you don’t press either the hr or min buttons within 3 seconds, the coee maker will

revert to normal, and the current time will show.

MAKING COFFEE

1. Press the 1 button – the 1 icon will appear on the display.

2. Shortly afterwards, coee will start to drip into the carafe.

3. If you want to stop the coee maker while it’s brewing, press the 1 button.

4. Once brewed, the hotplate will keep the carafe warm for up to 40 minutes.

USING THE TIMER

Note: Make sure the clock is set to the correct time. Use the h and min buttons.

1. Set the timer to the time you want to start brewing.

a) Press and hold the T button until the T icon ashes on the display.

b) Use the h and min buttons to set the time you want brewing to start.

If you don’t press either the hr or min buttons within 3 seconds, the coee maker will revert to

normal, and the current time will show. Press the T button to start again.

2. When the time is programmed, press the 1 button. The T icon will appear on the display. Your

coee maker is now set to make coee at the selected time.

• If you want to check the program time press the T button. The programmed time will show for 3

seconds and then return to the time of day.

• If you want to cancel the timer before brewing has started, press the 1 button.

• If you want to stop the coee maker while it’s brewing, press the 1 button.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Russell Hobbs 24390-56 in the language / languages: All languages as an attachment in your email.

The manual is 1,04 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Russell Hobbs 24390-56 Manual

Product: