649845
10
Zoom out
Zoom in
Previous page
1/176
Next page
10
SLICING/SHREDDING ATTACHMENT
Please refer to the images on page 5.
PARTS
1. Pusher
2. Body
3. Coarse shredding blade
4. Fine shredding blade
5. Slicing blade
6. Cover
` Dishwasher safe
ASSEMBLY
1. Remove the cover from the body by levering it off.
2. Fit the desired blade into the body. The open end of the blade should face outward.
3. Clip the cover over the front of the body.
4. Open the accessory drive cover (Fig. N). Make sure that the rear drive cover is fitted.
5. Fit the attachment into the drive at an angle (Fig P).
6. Rotate the accessory anticlockwise until it locks (Fig Q).
USING
Use the coarse shredder and slicer for ingredientss that will be cooked.
Use the fine shredder and slicer for ingredientss that will be used in salads and sandwiches.
Chocolate, nuts, and cheese will chop/grind better if chilled first.
1. Cut the food to a shape that will go down the tube.
2. Put the plug into the power socket.
3. Select speed 4. Using the wrong speed may cause damage.
4. Remove the pusher, and drop the ingredients down the tube.
5. Replace the pusher, and use it to push the ingredients gently down the tube.
6. Switch the appliance off (0) and unplug it.
GRINDING CUP ATTACHMENT
Please refer to the images on page 6.
PARTS
1. Cup
2. Blade assembly
` Dishwasher safe
ASSEMBLY AND USING
Use the grinding cup for grinding small amounts of dry ingredients such as coffee beans, nuts, spices, etc.
1. Place the ingredients into the cup.
2. Screw the blade assembly onto the cup and tighten firmly.
1. Slide off the blending jug drive cover (Fig R).
2. Insert the attachment into the drive opening with the t mark on the attachment aligned
with the Umark on the mixer (Fig S).
3. Twist the attachment clockwise until the t mark on the attacment is aligned with the
Lmark on the mixer (Fig T).
4. Operate the motor in short bursts by turning the speed control to the Y position. Release the control
to stop the motor.
CARE AND MAINTENANCE
Switch off (O) and unplug before cleaning.
Mixer:
1. Clean as soon after use as possible to prevent residues setting inside the bowl.
2. Wash the bowl, splash guard and attachments in warm soapy water, rinse, and dry.
3. You may put the bowl and attachments in a dishwasher, but note: the harsh environment inside the
dishwasher will affect the surface finishes. The damage should be cosmetic only, and should not
affect the operation of the appliance.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Russell Hobbs 23490 Aura at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Russell Hobbs 23490 Aura in the language / languages: All languages as an attachment in your email.

The manual is 2,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info