Manual Russell Hobbs 23480-56 (page 6 of 136) (All languages)

705871

Zoom out

Zoom in

1/136

USING YOUR BLENDER

1. Check that the speed control is set to O.

2. Put the plug into the power socket (switch the socket on, if its switchable).

3. Turn the speed control clockwise to the speed you want.

4. The range is from 1 (low) to 10 (high). Turn the speed control back to O to turn the motor o.

5. To operate the motor in short bursts, turn the speed control to the Y position. Release the control to

stop the motor.

6. If you need to add other ingredients during blending, turn the cap anticlockwise and lift it o. Add

the ingredients then replace the cap and turn it clockwise to lock it.

7. When you have nished blending, turn the speed control to O and wait for the blades to stop before

removing the lid from the jug or the jug from the mixer.

8. To remove the jug, twist it anticlockwise until the

mark is aligned with the

mark.

CARE AND MAINTENANCE

Switch o (O) and unplug before cleaning.

Mixer:

1. Clean as soon after use as possible to prevent residues setting inside the bowl.

2. Wash the bowl, splash guard and attachments in warm soapy water, rinse, and dry.

3. You may put the bowl and attachments in a dishwasher, but note: the harsh environment inside the

dishwasher will aect the surface nishes. The damage should be cosmetic only, and should not

aect the operation of the appliance.

4. Wipe the outside surfaces of the appliance with a clean damp cloth.

Blending jug:

1. Wash the blending jug, cap and lid in warm soapy water. Rinse and dry.

2. You may wash the jug, cap and lid in a dishwasher. However, we recommend that you remove the

blade before washing in a dishwasher.

To remove the blade:

1. Turn the jug upside down.

2. Twist the blade clockwise in the direction of the

symbol (Fig H).

3. Carefully lift out the blade unit (Fig J). Take care, the blades have very sharp edges.

4. Remove the seal and carefully wash the blade and seal in warm soapy water. Rinse and dry.

5. Ret the seal to the blade then lower the blade into the jug and twist it as far as it will go

anticlockwise in the direction of the Lsymbol (Fig H). Make sure the seal is tted and the blade is

fully tightened otherwise the jug may leak during use.

RECYCLING

To avoid environmental and health problems due to hazardous substances,

appliances and rechargeable and non-rechargeable batteries marked with one of

these symbols must not be disposed of with unsorted municipal waste. Always

dispose of electrical and electronic products and, where applicable, rechargeable and

non-rechargeable batteries, at an appropriate ocial recycling/collection point.

MIXER RECIPES

PIZZA DOUGH

dough hook

• 400g plain our

• 1 sachet active dried yeast (about 2½ tsp)

• 250ml warm water

• 25ml olive oil

• 2.5g sugar

• 5g salt

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Russell Hobbs 23480-56 in the language / languages: All languages as an attachment in your email.

The manual is 1,91 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Russell Hobbs 23480-56 Manual

Product: