Manual Russell Hobbs 23240-56 (page 4 of 76) (All languages)

705555

Zoom out

Zoom in

1/76

FILLING

1. Remove the carafe from the hotplate.

2. Open the lid.

3. Fill the reservoir with the exact amount of water required. Note that the brewing process will use all

of the water that you put in the reservoir.

4. Make sure that the ﬁlter holder is pressed down all the way into position. It will click when correctly

installed.

5. Put a #4 paper ﬁlter into the ﬁlter holder.

6. The reservoir is calibrated to give 14 large cups (at 125ml per cup) and 21 small cups (at 83ml per cup).

For each large cup, add 6g of ground ﬁlter coﬀee and for each small cup add 4g.

7. Close the lid.

8. Replace the carafe on the hotplate.

SET THE CLOCK

It isn’t neccessary to set the clock to use your coﬀee maker but you will need to set it if you want to use

the timer functions.

1. Put the plug into the power socket.

2. Use the h and min buttons to set the correct time in 24 hour format.

• The clock will retain its settings until the coﬀee maker is unplugged.

COFFEE STRENGTH

Pressing the 1-4 button will make the brewed coﬀee slightly stronger. You can also use it if you are only

brewing a partial carafe of coﬀee (i.e. not completely ﬁlling the reservoir). Your coﬀee maker will then alter

the brewing process so your coﬀee will have about the same strength as it would if you had made a full

carafe.

MAKING COFFEE

Note: If you want to use the coﬀee strength feature press the 1-4 button before pressing the ] button.

The 1-4 button will light up.

1. Press the ] button – the 1 icon will appear on the display. The ] button will light up.

2. Shortly afterwards, coﬀee will start to drip into the carafe.

3. If you want to stop the coﬀee maker while it’s brewing, press the ] button.

4. Once brewed, the hotplate will keep the carafe warm for up to 40 minutes.

USING THE TIMER

Note: Make sure the clock is set to the correct time. Use the h and min buttons.

1. Set the timer to the time you want to start brewing.

a) Press the T button .

b) Use the h and min buttons to set the time you want brewing to start.

If you don’t press either the h or min buttons within 5 seconds, the coﬀee maker will revert to

“normal”, and the current time will show. Press the T button to start again.

2. When the time is programmed, press the ] button. The T button will light up and the T icon will

appear on the display. Your coﬀee maker is now set to make coﬀee at the selected time.

3. If you want to use the coﬀee strength feature when using the timer, press the 1-4 button now. The

1-4 button will light up.

• If you want to cancel the timer before brewing has started, press the ] button.

• If you want to stop the coﬀee maker while it’s brewing, press the ] button.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Russell Hobbs 23240-56 in the language / languages: All languages as an attachment in your email.

The manual is 1,08 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Russell Hobbs 23240-56 Manual

Product: