705939
5
Zoom out
Zoom in
Previous page
1/8
Next page
5
TEMPERATURE SETTING GUIDE
L
abel marking
Dot setting
j cool – nylon, acrylics, polyester
k warm – wool, polyester mixtures
l hot – cotton, linen
/max
i do not iron
If the instructions on the fabric label differ from this guide, follow the instructions on
the label.
FILLING
You may use the iron with tap-water, but if you live in a hard water area, you should
use distilled water (not chemically descaled or softened water).
If you buy distilled water, check that it’s suitable for use in irons.
1. Set the temperature control to set the steam control to
S
.
2. Unplug the iron.
3. Pour water into the water inlet.
4. Pour slowly, and try to pour down one side of the inlet, to allow the air in the
reservoir to escape, otherwise you’ll cause an air lock and the water will
overow.
5. Don’t fill past the max mark on the reservoir.
6. Wipe up any spillage.
SWITCH ON
1. Set the temperature control to set the steam control to
S
.
2. Stand the iron on its heel.
3. Put the plug into the power socket (switch the socket on, if it’s switchable).
4. Turn the temperature control to bring the setting you want next to the mark.
The light will come on.
5. When the iron reaches the temperature you set, the light will go off. It’ll then
cycle on and off as the thermostat operates to maintain the temperature.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Russell Hobbs 22470 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Russell Hobbs 22470 in the language / languages: English as an attachment in your email.

The manual is 0,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info