637312
63
Zoom out
Zoom in
Previous page
1/68
Next page
63
[
18 Remove the pusher, and drop the ingredients down the tube.
19 Replace the pusher, and use it to push the ingredients gently down the tube.
C DISASSEMBLY
20 Switch the appliance off (0) and unplug it.
21 Turn the body 45° clockwise, to disengage the bayonet fittings, and pull it off the motor unit.
22 Turn the ring nut 45° clockwise.
23 Lift it off the body.
24 Push the rear of the cutter mount towards the body, then tip the cutter mount out.
25 Stand the cutter mount upright on the work surface.
26 Press the tab on the narrow end of the cutter towards the wide end of the cutter mount, to
release it from the cutter mount, then lift the cutter out.
27 Rotate the cutter mount, then remove the second cutter.
C STORAGE
28 You may store of the cutters in the guides inside the pusher – they fit narrow end down.
C NOISE
29 If you find the appliance is noisy, the cutter may be rubbing against the ring nut.
30 Applying a little cooking oil to the inside of the ring nut before use should fix this.
C CARE AND MAINTENANCE
1 Switch the appliance off (0) and unplug it.
2 Wipe the outside of the motor unit with a clean damp cloth.
3 Wash the removable parts in warm soapy water, rinse well, drain, and air dry.
` You may wash these parts in a dishwasher.
4 If you use a dishwasher, the harsh environment inside the dishwasher will affect the surface
finishes.
5 The damage should be cosmetic only, and should not affect the operation of the appliance.
C STAINING
6 Carotenoids, which are found in many other vegetables as well as carrots, can cause severe
staining. This staining may be impossible to remove. Don’t worry about it, it won’t affect the
operation of the appliance.
7 Rubbing the stains with cooking oil immediately before washing may help.
8 Cleaning the affected parts in a dishwasher may reduce the staining.
C JAMMING
9 Switch the appliance off (0) and unplug it.
10 Dismantle the appliance, clean it, assemble it, and start again.
W
ENVIRONMENTAL PROTECTION
To avoid environmental and health problems due to hazardous substances in electrical and
electronic goods, appliances marked with this symbol mustn’t be disposed of with unsorted
municipal waste, but recovered, reused, or recycled.
instructions
diagrams
1 tab
2 slots
3 cutters
4 slicer
5 coarse grater
6 fine grater
7 ring nut
8 bayonet fitting
9 cutter mount
10 body
11 tub e
12 guides
13 pusher
14 cap
15 switch
16 motor unit
` dishwasher safe
63


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Russell Hobbs 22280 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Russell Hobbs 22280 in the language / languages: All languages as an attachment in your email.

The manual is 1,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info