705564
67
Zoom out
Zoom in
Previous page
1/72
Next page
67
[
C SWITCH ON
9 Replace the carafe on the hotplate.
10 Put the plug into the power socket.
• The display will glow, showing 12:00 blinking and W + 12 (12 cups).
C COFFEE NOW
11 Ignore the display.
12 Use the W button to cycle the bottom of the display to the grind setting you need:
X = you’re using ground coffee
W + 4, 6, 8, 10, or 12 = you’re using coffee beans + the number of cups/tablespoon
13 Press the 1 button – If you’re using coffee beans, the grinder will operate.
14 Shortly afterwards, coffee will start to drip into the carafe.
• If you want to stop the coffee maker while it’s brewing, press the 1 button. The 1 light will
go off.
15 When its done, the hotplate will keep the carafe warm.
16 The display will count up, to show how long the keep warm function has been operating.
17 After a set time, the heater will switch off, the display will stop glowing, and the appliance
will go into standby mode.
18 To wake the appliance, press the 2 button.
• The default keep warm time is 40 minutes.
• You may change this – see below.
• After about 40 minutes, chemical changes will affect the taste of the coffee.
C COFFEE LATER
19 Set the clock to the correct time.
a) Use the h and min buttons to set the correct hour and minute.
b) It’s a 12 hour clock – the display shows PM for afternoon.
c) If you overshoot, you can’t step back.
d) The clock will retain its settings until the coffee maker is unplugged.
20 Set the timer to the time you want to start brewing.
a) Press the Y button and hold it for 3 seconds.
b) “Y” will blink on the display.
c) If you don’t press anything for 5 seconds, the display will revert to normal.
d) You’ll have to press the Y button, and start again.
e) Use the h and min buttons to set the correct hour and minute.
f) When you’ve set the time, wait 5 seconds, and the display will revert to normal.
C ACTIVATION
21 Press the c button to activate the timer.
• Y will show on the display.
22 To cancel the timer before brewing has started, press the button again.
C KEEP WARM TIME
23 The default keep warm time is 40 minutes.
24 To change this, press the Y button, and hold it in for 3 seconds.
• The display will show the current keep warm time.
25 Use the min button to choose the keep warm time you want – the options are 00, 20, 30, and
40 minutes after brewing has finished.
26 Press the Y button again, to activate your choice.
instructions
diagrams
1 filter
1 grinder
2 filter holder
3 catch
4 filter lid
5 reservoir lid
6 hotplate
7 carafe
| press
67


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Russell Hobbs 22000-56 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Russell Hobbs 22000-56 in the language / languages: All languages as an attachment in your email.

The manual is 2,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info