Manual Russell Hobbs 21682-56 (page 4 of 72) (All languages)

704293

Zoom out

Zoom in

1/72

TOASTING BREAD

1. Sit the toaster upright on a ﬁrm, level, heat-resistant surface.

2. Put the plug into the power socket.

3. Turn the browning control to the required setting (1 = light, 6 = dark).

4. Put bread into the toasting slots (maximum thickness 25mm).

5. Press the lever down fully. It won’t lock down unless the toaster is connected to the electricity supply.

6. The toasting time gauge will show the toasting time and start to count down.

7. When it reaches 0, the toast will pop up.

8. To stop toasting, press the 5 button.

• You may raise the lever further, to remove small items.

• You may raise the lever during toasting, to check progress, then lower it again.

FROZEN BREAD

1. Leave the browning control at your favoured setting, insert the frozen bread, lower the lever, then

press the f button.

2. The f light will come on, and the toasting time will be altered automatically to give the same degree

of browning you get with unfrozen bread.

3. The toasting time gauge will show the toasting time and start to count down.

4. When it reaches 0, the toast will pop up.

REHEATING TOAST

1. Leave the browning control at your favoured setting, insert the bread, lower the lever, then press the

m button.

2. The m light will come on, and the toast will be given a short burst of heat.

3. The toasting time gauge will move to the 30 second mark and start to count down.

4. When it reaches 0, the toast will pop up.

• Only reheat plain, “unbuttered” toast.

TOASTING TIME GAUGE

The gauge shows the time it will take to make the toast at the selected browning control setting.

• If you cancel toasting by pressing the 5 button, the gauge will stay at the time it was showing when

you pressed the button. If you restart toasting by lowering the lever, the gauge will move to the 3

mark then readjust to show the correct toasting time.

• If you change the position of the browning control during toasting, the gauge will move to the 3

mark then readjust to show the correct toasting time.

• It will also adjust itself automatically when you use the frozen bread f or reheat buttons m.

BUN WARMER

Don’t use the bun warmer to warm frozen, buttered, coated, iced, or ﬁlled buns.

1. Sit the bun warmer on top of the toaster, with the feet inside the slots.

2. Sit the buns on top of the bun warmer.

3. Set the browning level to 1, then lower the lever.

4. When the lever pops up, remove the warmed buns.

5. Don’t touch the bun warmer wires – they’ll be hot.

6. Remove the bun warmer before using the toaster normally.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Russell Hobbs 21682-56 in the language / languages: All languages as an attachment in your email.

The manual is 0,99 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Russell Hobbs 21682-56 Manual

Product: