4
GENERAL
• When you lift the kettle, you may see moisture on the stand. Don’t worry – it’s the steam used to
switch off automatically, which then condenses and escapes via vents under the kettle.
• You may see some discolouration on the floor of the kettle. Again, don’t worry – it’s due to the
bonding of the element to the kettle floor.
BOIL DRY PROTECTION
• This will shorten the life of the element. A boil-dry cut-out will switch the kettle off.
• You must then remove the kettle from its stand to reset the cut-out.
• Sit the kettle on the work surface till it’s cold.
CARE AND MAINTENANCE
1. Unplug the stand, and let the kettle cool before cleaning.
2. Wipe all surfaces with a clean damp cloth.
3. Remove the lid.
4. Push the hook on top of the filter down then lift the filter out of the kettle (fig A).
5. Rinse the filter under a running tap while brushing with a soft brush.
6. Lower the filter into the kettle, and engage the bottom hook in the bottom of the spout.
7. Press the top of the filter towards the kettle, to lock the hook in place.
8. Refit the lid.
Descale regularly, (at least monthly).
Use a proprietary descaler. Follow the instructions accompanying the descaler.
Products returned under guarantee with faults due to scale will be subject to a repair charge.
W
ENVIRONMENTAL PROTECTION
To avoid environmental and health problems due to hazardous substances in electrical and
electronic goods, appliances marked with this symbol mustn’t be disposed of with unsorted municipal
waste, but recovered, reused, or recycled.
