561297

Russell Hobbs 20345-56 Manual

3
Zoom out
Zoom in
Previous page
1/48
Next page
3
4 Align the ring nut with the bayonet fittings on the hole.
5 Turn the ring nut 10mm anti-clockwise, to lock the cutter into the body.
6 Turn the body till the tube is vertical.
7 Now turn it 45° clockwise, to engage the bayonet fittings inside the motor unit.
8 Turn it 45° anti-clockwise, to lock it in place.
C IN USE
9 Cut the food to a shape that will go down the tube (45x35mm).
10 Put the plug into the power socket.
11 Move the switch: 1 on 0 off Y pulse
Y In this position, the switch is spring-loaded. When you let go, it’ll return to 0.
12 Remove the pusher, and drop the ingredients down the tube.
13 Replace the pusher, and use it to push the ingredients gently down the tube.
C DISASSEMBLY
14 Switch the appliance off (0) and unplug it.
15 Turn the body 45° clockwise, to disengage the bayonet fittings, and pull it off the motor unit.
16 Turn the ring nut 10mm clockwise, to unlock it, and lift it of the body.
17 Tip the body up, so that the cutter drops out.
C JAMMING
18 Switch the appliance off (0) and unplug it.
, Dismantle the appliance, clean it, assemble it, and start again.
C CARE AND MAINTENANCE
19 Switch the appliance off (0) and unplug it.
20 Wipe the outside of the motor unit with a clean damp cloth.
21 Wash the removable parts in warm soapy water, rinse well, drain, and air dry.
` You may wash these parts in a dishwasher.
22 If you use a dishwasher, the harsh environment inside the dishwasher will affect the surface
finishes.
23 The damage should be cosmetic only, and should not affect the operation of the appliance.
C STORAGE
24 You may store two of the cutters in the spaces in the rear of the appliance.
C NOISE
25 If you find the appliance is noisy, the cutter may be rubbing against the ring nut.
26 Applying a little cooking oil to the inside of the ring nut before use should fix this.
W
ENVIRONMENTAL PROTECTION
To avoid environmental and health problems due to hazardous substances in electrical and
electronic goods, appliances marked with this symbol mustn’t be disposed of with unsorted
municipal waste, but recovered, reused, or recycled.
diagrams
1 ring nut
2 cutters
3 slicer
4 coarse grater
5 fine grater
6 grinder
7 body
8 tube
9 cutter (rear)
10 bayonet fitting
11 pusher
12 switch
13 motor unit
` dishwasher safe
instructions
3 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Russell Hobbs 20345-56 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Russell Hobbs 20345-56 in the language / languages: All languages as an attachment in your email.

The manual is 1,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info