561298

Russell Hobbs 20320-56 Manual

3
Zoom out
Zoom in
Previous page
1/48
Next page
3
5 Don’t use the appliance for any purpose other than those described in these instructions.
6 Don’t use the appliance if it’s damaged or malfunctions.
household use only
C PREPARATION
1 Unplug the appliance.
2 Lift the motor unit off the bowl. Lift the processing lid off the bowl.
3 Lower the blade unit over the spindle in the bottom of the bowl.
4 You may have to turn it slightly, to fit over the flanges on the spindle.
5 It’s spring-loaded, so you’ll feel some resistance as you push it down.
6 Put the food in the bowl.
a) Don’t try to chip ice, don’t try to chop raw meat, and take great care with the blades.
b) Don’t fill above max.
c) Don’t process hard foods – i.e. anything you can’t cut easily with a kitchen knife.
d) Don’t chop big bits – maximum 18mm cubes.
7 Align the central hole in the processing lid with the top of the blade unit, and lower the lid on
to the bowl.
8 Lower the motor unit on to the processing lid.
9 You may have to turn it slightly, to engage the top of the blade unit.
10 Put the plug into the power socket.
11 Press the switch to start the motor, release it to switch off.
12 It’s best to run the motor in bursts of a few seconds at a time, and inspect the results
between bursts.
13 Don’t run the motor for more than 1 minute, or it may overheat. After 1 minute, switch off for
at least 3 minutes, to let the motor cool.
C DONE?
14 Unplug the appliance.
15 Lift the motor unit off the bowl. Lift the processing lid off the bowl.
16 Put a finger on top of the blade unit, to stop it falling out.
17 Tip the processed contents out of the bowl.
18 Alternatively, hold the plastic part of the blade unit, turn it to free it from the spindle flanges,
and lift it straight up and out of the bowl.
19 Fit the storage lid to the bowl.
C CARE AND MAINTENANCE
20 Unplug the appliance.
21 Wipe the outside of the motor unit with a clean damp cloth.
22 Clean the inside of the blade unit with a toothpick.
23 Hand wash the removable parts.
` You may wash these parts in a dishwasher, but the harsh environment inside the dishwasher
will affect the surface finishes.
24 The damage should be cosmetic only, and should not affect the operation of the appliance.
W
ENVIRONMENTAL PROTECTION
To avoid environmental and health problems due to hazardous substances in electrical and
electronic goods, appliances marked with this symbol mustn’t be disposed of with unsorted
municipal waste, but recovered, reused, or recycled.
recipes are available on our website: http://www.russellhobbs.com/ifu/550931
diagrams
4 switch
1 motor unit
2 processing lid
3 storage lid
4 blade unit
5 bowl
6 spindle
7 flanges
instructions
3 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Russell Hobbs 20320-56 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Russell Hobbs 20320-56 in the language / languages: All languages as an attachment in your email.

The manual is 1,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info