561300
66
Zoom out
Zoom in
Previous page
1/72
Next page
66
Read the instructions, keep them safe, pass them on if you pass the appliance on. Remove all
packaging before use.
A IMPORTANT SAFEGUARDS
Follow basic safety precautions, including:
1 This appliance can be used by persons with reduced physical,
sensory or mental capabilities or lack of experience and
knowledge if they have been supervised/instructed and
understand the hazards involved.
•Children must not use or play with the appliance.
•Keep the appliance and cable out of reach of children.
& To avoid injury, take care handling the blades, emptying the jug,
and cleaning.
$ Don’t add hot liquid (over 40°C), as it may be ejected due to
sudden steaming.
2 Misuse of the appliance may cause injury.
3 Unplug the appliance before assembly, disassembly, or cleaning.
4 Don’t leave the appliance unattended while plugged in.
5 If the cable is damaged, it must be replaced by the manufacturer,
its service agent, or someone similarly qualified, to avoid hazard.
H Don’t immerse the appliance in liquid.
6 Switch off (Y) before fitting the jug to the motor unit.
7 Switch off (Y), and wait till the blades come to a stop before removing the lid from the jug,
or removing the jug from the motor unit.
8 Don’t put utensils into the jug while the appliance is plugged in.
9 Don’t use accessories or attachments other than those we supply.
10 Don’t use the appliance for any purpose other than those described in these instructions.
11 Don’t operate the appliance if it’s damaged or malfunctions.
12 Don’t run the motor continuously for more than 2 minutes, it may overheat. After 2 minutes
switch off for at least 2 minutes, to recover.
household use only
C ASSEMBLY
1 The jug, blade unit, and seal are packed together.
2 Sit the jug upside down, with the blade unit and seal in position.
3 Turn the jug base upside down, and screw it on to the bottom of the jug.
4 In use, treat the jug and base as a single unit.
C PREPARATION
5 Sit the motor unit on a dry, firm, level surface, near a power socket.
6 Align the d on the bottom of the jug with the U on the motor unit.
7 Lower the jug on to the motor unit, then turn the jug to align the d with the L.
8 Remove the lid.
9 Put the ingredients into the jug.
10 Don’t fill past the 1500ml mark. If you do, the contents may force the lid off when you start
the motor.
66


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Russell Hobbs 20230-56 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Russell Hobbs 20230-56 in the language / languages: All languages as an attachment in your email.

The manual is 1,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info