581101

Russell Hobbs 20230-56 Ilumina Blender Manual

67
Zoom out
Zoom in
Previous page
1/72
Next page
67
[
11 Replace the lid.
12 Fit the cap to the hole in the lid, and turn it anti-clockwise to lock it.
13 Don’t run the appliance without fitting the cap.
C SWITCH ON
14 Check that the speed control is set to Y.
15 Put the plug into the power socket.
C SPEED CONTROL
16 Turn the speed control to the speed you want (1 = low, 3 = high).
17 Turn the speed control back to Y to turn the motor off.
18 Turning the speed control anti-clockwise to Y will give you a short burst at high speed. In
this direction, the knob is spring-loaded. When you let go, it’ll return to Y.
19 The light will change colour as the speed changes.
1 blue purées
2 purple smoothies
3 green soups/ other
Y red ice crushing/ smaller batches
C ADDING INGREDIENTS
20 To add ingredients while the blender is working, remove the cap, pour the new ingredients
through the hole, then replace the cap.
C FINISHED?
21 Switch the appliance off (Y) and unplug it.
22 Turn the jug to align the d with the U to unlock it, and lift it off the motor unit.
U CRUSHED ICE
23 Before using the appliance to crush ice, make sure it’s clean, and rinse it out thoroughly.
24 The slightest trace of detergent may affect the taste of the crushed ice, and will flatten any
drink to which it is added.
25 For best results, full the jug with between 150ml and 500ml of ice cubes.
26 Put the lid on the blender, then:
27 Turn the speed control to Y for a second or two, then release it.
28 Check the results, and adjust.
C CARE AND MAINTENANCE
29 Switch the appliance off (Y) and unplug it.
30 Wipe the outside of the motor unit with a clean damp cloth.
31 Hand wash the removable parts.
` You may wash these parts in a dishwasher.
32 If you use a dishwasher, the harsh environment inside the dishwasher will affect the surface
finishes.
33 The damage should be cosmetic only, and should not affect the operation of the appliance.
S BLADE UNIT
34 You may wish to remove the blade unit for cleaning.
35 Remove the lid.
36 Sit the jug upside down.
37 Unscrew the jug base and lift it off.
38 Handle only the plastic – don’t touch the metal parts.
39 Carefully, lift the blade unit out of the jug.
instructions
diagrams
4 light
5 motor unit
6 speed control
7 jug base
8 blade unit
9 seal
10 jug
11 handle
12 lid
13 cap
` dishwasher safe
… 67 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Russell Hobbs 20230-56 Ilumina Blender at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Russell Hobbs 20230-56 Ilumina Blender in the language / languages: All languages as an attachment in your email.

The manual is 1,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info