561301
67
Zoom out
Zoom in
Previous page
1/72
Next page
67
[
C THE WAND
8 Generally, the wand can do anything a normal blender can do, but faster, and with less
washing up – make mayonnaise, milkshakes, smoothies, or fruit drinks in the beaker. You can
blend, pulp or purée ingredients in the pan or bowl youre going to cook them in.
9 Whatever container you use, make sure it’s on a stable, flat surface, and support it with your
free hand, to prevent it wandering over the work surface.
10 Don’t immerse the wand past the top of the parallel-sided tube.
11 When using it in hot liquids, don’t let the blade break the surface at an angle, as you might
spray liquid outside the bowl/pan/container.
12 Don’t switch on till the blade is inside the food container.
13 Switch off before lifting the blade from the food container.
C THE WHISK
14 Generally speaking, while you use the wand to replace a blender, use the whisk where you
would have normally used a balloon whisk, but let the handle do the work, instead of your
arm muscles.
15 Push the whisk into the bottom of the whisk holder.
16 To remove the whisk, simply pull it out of the bottom of the whisk holder,
, Don’t immerse the whisk past the bottom of the whisk holder.
C THE CHOPPER
17 You can use the chopper as a mini food processor.
18 Unplug the handle.
19 Hold the plastic part of the chopper – keep your fingers well clear of the blade.
20 Lower it into the bowl, over the spindle in the bottom of the bowl.
21 Add the ingredients – don’t fill the bowl above the 450ml mark.
22 Fit the bowl lid – the top of the chopper fits into the drive in the underside of the lid.
23 Fit the handle to the top of the bowl lid.
24 Use the chopper in bursts of a few seconds, otherwise you risk overdoing it.
25 Unplug the handle, then remove the handle from the lid.
26 Lift the lid gently from the bowl – take care that any drips fall into the bowl.
27 Lift the chopper only by the plastic part.
28 For storage, you may use the non-slip base as a lid.
C THE BEAKER
29 Don’t fill the beaker more than about half full.
30 Sit it on a stable, flat work surface, and support it with your free hand.
31 Don’t lift it off the work surface and hold it in your hand – if it slips, you’ll hurt yourself.
32 For storage, you may use the non-slip base as a lid.
C CARE AND MAINTENANCE
33 Unplug the appliance.
34 Take great care with the blades – don’t handle them directly, use a nylon washing-up brush.
35 Wipe the handle surfaces with a soft damp cloth.
36 Wipe the whisk holder and bowl lid with a damp cloth.
37 Try to keep them dry, as they contain the gearboxes for the whisk and jug.
38 You may wash the whisk, beaker, bowl, and non-slip bases in warm soapy water.
instructions
diagrams
1 speed control
2 light
4 switch
3 handle
4 wand
5 blade
6 whisk holder
7 whisk
8 bowl lid
9 chopper
10 bowl
11 spindle
12 non-slip base
13 beaker
` dishwasher safe
67


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Russell Hobbs 20220-56 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Russell Hobbs 20220-56 in the language / languages: All languages as an attachment in your email.

The manual is 1,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info