561307
4
Zoom out
Zoom in
Previous page
1/96
Next page
4
0 GROUND COFFEE
9 Put filter-ground coffee into the filter. The amount will vary with the type of coffee and
individual taste, but we suggest two rounded teaspoons per cup of water.
10 Close the drawer, then replace the carafe on the hotplate.
11 Jump to point 17.
g COFFEE BEANS
12 Remove the lid from the coffee mill.
13 Fill the mill with coffee beans.
14 Replace the lid.
15 Turn the knob till the is next to the setting you require – fine h coarse.
16 Close the drawer, then replace the carafe on the hotplate.
, Don't use the appliance just as a coffee grinder. If you don't let it run its full cycle from
grinding to coffee making, you'll break it.
C SWITCH ON
17 Put the plug into the power socket. The display will light up.
18 If you don’t touch the controls for 1 minute, the lights will go out, to save electricity.
19 Press any button to wake the appliance.
C COFFEE NOW
20 Ignore the clock.
21 If you’re using coffee beans, use the 2-12 button to set the number of cups you want. This
determines the length of time the mill operates.
22 If you’re using coffee beans, use the ggg button to select the coffee strength g = mild, gg
= medium, ggg = strong.
23 Press the 0 button if you’re using ground coffee.
24 Press and release the i button. “i“ will show on the display.
25 If you’re using coffee beans, the mill will operate.
26 Shortly afterwards, coffee will start to drip into the carafe.
27 When it’s done, the hotplate will keep the carafe warm. “i” will blink on the display.
C AUTO SHUT-OFF
28 About 2 hours after brewing, the coffee maker will shut down 12 gg“ will show on the
display.
29 Unplug, and let the appliance and carafe cool down fully before cleaning, or for about 10
minutes before refilling.
, If left for much more than an hour, chemical changes in the coffee liquor start to affect the
flavour. It’s best to pour it away and make a fresh pot.
C COFFEE LATER
30 Set the clock to the correct time.
, It’s a 24 hour clock.
31 Use the h and min buttons to set the correct hour and minute.
32 The clock will retain its settings until the coffee maker is unplugged.
33 Set the timer to the time you want to start brewing.
a) Press the T button and hold it for 3 seconds.
b) “T” will blink on the display.
c) If you’re using coffee beans, use the 2-12 button to set the number of cups you want. This
determines the length of time the mill operates.
d) If you’re using coffee beans, use the ggg button to select the coffee strength g = mild,
gg = medium, ggg = strong.
e) Press the 0 button if youre using ground coffee.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Russell Hobbs 20060-56 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Russell Hobbs 20060-56 in the language / languages: All languages as an attachment in your email.

The manual is 2,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info