509739

Russell Hobbs 19770-56 Manual

7
Zoom out
Zoom in
Previous page
1/140
Next page
7
, If the oil level isn't too low, and the cut-out has operated for some other reason, ring
Customer Service.
57 Use the reset tool to press the reset button and reset the cut-out.
58 The excess heat will have spoiled the oil, so clean out the bowl and refill with fresh oil.
C CARE AND MAINTENANCE
59 Unplug the appliance and let it cool down before cleaning or storing away.
normal cleaning
60 Wipe outer surfaces with a damp cloth.
61 Put the lid on top of the bowl, to keep dust, etc. out of the oil.
full cleaning (after every few uses)
62 Cover the work surface with at least 3 layers of kitchen paper.
63 You'll need a 5 litre container and a wide necked funnel.
64 If you want to filter the oil, use a sieve lined with muslin or filter paper.
65 Remove the lid and basket.
66 Lift the heating/control unit off.
67 Pour the oil into the funnel.
68 Clean the heating/control unit with a clean damp cloth.
69 Wash the body, lid, basket, and bowl in warm soapy water and dry thoroughly.
70 You may wash these parts in a dishwasher.
71 If you use a dishwasher, the harsh environment inside the dishwasher will affect the surface
finishes.
72 The damage should be cosmetic only, and should not affect the operation of the appliance.
73 If residue builds up on the element, clean it with detergent, and clean more often.
74 Remove all trace of detergent and dry before reassembling.
reassembly
75 Put the bowl into the body of the fryer.
76 Engage the grooves on the control unit with the guides on the rear of the body, and slide the
control unit into place.
77 Put the basket inside the bowl.
78 Pull the basket handle wires apart a little, to pass the latch, and swing the handle down into
the basket.
79 Replace the lid.
discolouration
80 With use, the basket, element, thermostats, and control wires will discolour. This is inevitable,
harmless, and won't affect the operation of the appliance.
H ENVIRONMENTAL PROTECTION
To avoid environmental and health problems due to hazardous substances in electrical and
electronic goods, appliances marked with this symbol mustn’t be disposed of with
unsorted municipal waste, but recovered, reused, or recycled.
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Russell Hobbs 19770-56 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Russell Hobbs 19770-56 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 5,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info