509795
67
Zoom out
Zoom in
Previous page
1/72
Next page
67
13 To release the jug, you must first turn the lid to bring the safety switch to the right of the
handle.
, Don’t try to move the lid or the jug while the motor is running.
C THE CONTROLS
1 Press the right hand button to run the motor continuously.
0 1 Press the left hand button to cancel continuous running, and to pulse the motor (run in
bursts) – press 0 1 to start the motor, release it to stop.
C SWITCH ON
14 Put the plug into the power socket.
r USING THE CHOPPER
15 You may use continuous running (1) or pulse (0 1).
16 Continuous running is easier, if you have to add ingredients one after another.
17 Pulse gives better control over what is happening inside the jug.
18 To add ingredients while the motor is running:
a) Lift the pusher out of the tube.
b) Add the ingredients via the tube.
c) Replace the pusher.
19 If you’re using just liquids, don’t fill the jug past the MAX LIQUID LEVEL mark.
20 If you’re using solids, or a mixture of liquids and solids, don’t fill the jug past the MAX FOOD
LEVEL mark.
, If you need to rinse the jug, turn the tabs anti-clockwise, and remove the drive shaft first, to
avoid getting it wet.
s USING THE SLICING/GRATING DISC
21 Press 1 to run the motor continuously.
22 Remove the pusher, and drop the ingredients down the tube.
23 Replace the pusher, and use it to push the ingredients gently down the tube.
24 Don’t use fingers or cutlery to push food down the tube – only the pusher.
25 The blade(s) on top of the disc will slice or grate the food into the jug.
26 Don’t let the jug get more than about half full – stop and empty it.
C CARE AND MAINTENANCE
27 Switch the appliance off (0 1) and unplug it.
28 Wash the removable parts in warm soapy water, rinse well, drain, and air dry.
29 Wipe the outside of the motor unit with a clean damp cloth.
30 Don’t put any part of the appliance in a dishwasher.
H ENVIRONMENTAL PROTECTION
To avoid environmental and health problems due to hazardous substances in electrical
and electronic goods, appliances marked with this symbol mustn’t be disposed of with
unsorted municipal waste, but recovered, reused, or recycled.
instructions
diagrams
1 motor unit
0 1 off/pulse
1 continuous processing
U unlock
L lock
2 tab
3 drive shaft
4 handle
5 jug
6 chopper
7 support
8 disc
9 slicer
K slicing
/ grating
10 safety switch
11 lid
12 tube
13 pusher
67


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Russell Hobbs 19460-56 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Russell Hobbs 19460-56 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info