649846
5
Zoom out
Zoom in
Previous page
1/92
Next page
5
USING THE MILL
1. Switch the appliance off () and unplug it.
2. Turn the mill upside down. Turn the mill base clockwise, to release it, and lift it out of the mill.
3. Put the goods to be ground into the bowl – dry goods only. For best results, don’t fill the bowl more
than one third full.
4. Replace the mill base inside the mill, and turn it anti-clockwise, to lock it in place. Turn the mill right
way up.
5. Lower the mill on to the motor unit, then turn it clockwise, to lock it in place.
6. Turn the speed control to Y in short bursts till you achieve the size of grind you want.
7. Let the speed control return to 0.
8. Turn the mill anti-clockwise to unlock it, and lift it off the motor unit.
9. Turn the mill upside down. Tap the mill a couple of times to move all the grounds into the bowl.
10. Turn the mill base clockwise, to release it, and lift it out of the mill. Empty the bowl.
CARE AND MAINTENANCE
1. Switch the appliance off (0) and unplug it.
2. Wipe the outside of the motor unit with a clean damp cloth.
3. Hand wash the removable parts.
4. If you use a dishwasher, the harsh environment inside the dishwasher will affect the surface finishes.
5. The damage should be cosmetic only, and should not affect the operation of the appliance.
` You may wash these parts in a dishwasher.
To remove the blade unit from the jug:
1. Remove the lid.
2. Turn the jug upside down.
3. Turn the blade unit clockwise till it comes loose from the jug base.
4. Remove the blade unit and seal.
5. Hand wash the removable parts.
6. Replace the blade unit and seal.
7. Turn the blade unit anti-clockwise to tighten it.
OVERLOAD PROTECTION
This appliance is fitted with a device to protect it in the event it becomes overloaded or overheats. If the
appliance stops without warning for any reason, do the following:
1. Switch off (O) and unplug the appliance.
2. Allow the appliance to cool down for 15 minutes.
3. Once cooled down the protection device will automatically reset and the appliance can be used
normally again.
W
ENVIRONMENTAL PROTECTION
To avoid environmental and health problems due to hazardous substances in electrical and
electronic goods, appliances marked with this symbol mustn’t be disposed of with unsorted municipal
waste, but recovered, reused, or recycled.
RECIPE
CORIANDER PESTO
2 handful of coriander leaves
2 garlic cloves
60g pine nuts
125 ml olive oil
60 g Parmesan, grated
Process the coriander, garlic, pine nuts and half the oil till smooth. Transfer to a large bowl.
Stir in the Parmesan. Add oil to adjust the consistency: For a dip: thick. For a topping: medium. For pasta
sauce: thin.
Recipes are available on our website:
using the blender: http://www.russellhobbs.com/ifu/550931
smoothies: http://www.russellhobbs.com/ifu/550941
using the processor: http://www.russellhobbs.com/ifu/551078
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Russell Hobbs 19005 Aura at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Russell Hobbs 19005 Aura in the language / languages: All languages as an attachment in your email.

The manual is 1,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info