4
h STEAM IRONING
23 If you intend to use steam, the temperature setting must be S or higher.
24 Wait till the light goes off, then start ironing.
k SPRAY
, Water spotting affects some fabrics. Test this on a hidden part of the fabric.
25 Lift the iron off the fabric.
26 Aim the spray nozzle at the fabric.
27 Press the * button.
28 You may have to press it 2 or 3 times to pump water through the system.
i SHOT OF STEAM
29 If you intend to use steam, the temperature setting must be S or higher.
30 If you don’t, you’ll get water on your clothes, not steam.
31 Lift the iron off the fabric.
32 Press the ~ button.
33 You may have to press it 2 or 3 times to pump water through the system.
34 Leave 4 seconds between shots, to let the steam build up.
n DRY IRONING
35 Do your dry ironing first, then switch off, fill the reservoir, and do your steam ironing.
36 Wait till the light goes off, then start ironing.
l VERTICAL STEAMING
37 Remove wrinkles from hanging clothes, hanging curtains, and furnishing fabrics.
38 Check that there is adequate ventilation behind the fabric, otherwise moisture may build up,
causing mildew.
39 Check that there is nothing behind the fabric that may be damaged by the steam.
40 Check that pockets, turn-ups, and cuffs are empty.
41 Set the temperature control to max.
42 Lift the iron off the fabric.
43 Press the ~ button.
44 You may have to press it 2 or 3 times to pump water through the system.
45 Leave 4 seconds between shots, to let the steam build up.
C AFTER USE
46 Set the temperature control to •.
47 Unplug the appliance.
48 Open the cover.
49 Hold it over a sink, turn it upside down, and drain the water from the reservoir, via the water
inlet.
50 Close the cover.
51 Sit the iron on its heel.
52 Leave it to cool down completely.
53 When it’s cold, wipe off any moisture, and wind the cable round the heel.
54 Store the iron on its heel, to avoid corrosion and damage to the soleplate.
C SELF CLEAN
55 To prevent scale building up, use the self clean function at least monthly in normal water
areas, more often in hard water areas.
, Products returned under guarantee with faults due to scale will be subject to a repair charge.
56 You’ll need a basin or a large bowl to catch the water coming out of the soleplate.
57 Fill the reservoir to the max mark.
58 Set the temperature control to max.
