Manual Russell Hobbs 18616-56 (page 3 of 94) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

509710

Zoom out

Zoom in

1/94

C PREPARATION

5 Check for textile care symbols (i j k l).

6 Iron fabrics needing low temperatures j ﬁrst, then those that need medium temperatures

k, and ﬁnish with those needing high temperatures l.

X FILLING

7 The iron may be used with tap-water, but if you live in a hard-water area, you should use

distilled water (not chemically descaled water).

8 If you buy distilled water, check that it is marketed as suitable for irons.

9 Don’t add anything to the water – you’ll damage the iron.

10 Unplug the appliance.

11 Set the temperature control to •. Set the steam control to S.

12 Place the iron on its soleplate.

13 Gently pull the cover out of the water inlet, and let it hang to the side.

14 Pour water from the jug into the water inlet.

15 Pour slowly, to allow the air in the reservoir to escape, and avoid an airlock.

16 Don’t ﬁll past the max mark on the reservoir, or water will escape in use.

17 Replace the cover in the water inlet.

18 Wipe up any spillage.

C SWITCH ON

19 Set the temperature control to •. Set the steam control to S.

20 Sit the iron on its heel.

21 Move the clip to free the cable.

22 Put the plug into the power socket.

23 Turn the temperature control to bring the setting you want (see the guide below) next to the

5 mark. The light will glow.

24 When the iron reaches the set temperature, the light will go oﬀ. It will then cycle on and oﬀ as

the thermostat operates to maintain the temperature.

temperature setting guide

label marking temperature setting

j cool – nylon, acrylics, polyester •

k warm – wool, polyester mixtures ••

l hot – cotton, linen •••/max

i do not iron

, If the instructions on the fabric label diﬀer from this guide, follow the instructions on the

label.

C REDUCING TEMPERATURE

25 Reducing temperature takes longer, as the appliance has to lose heat.

26 Organise your ironing so you don’t need to reduce the temperature (“preparation” point 5).

h STEAM IRONING

27 If you intend to use steam, the temperature setting must be S or higher.

28 If you don’t, you’ll get water on your clothes, not steam.

29 Set the steam control to the setting you want (S = no steam, # = high).

30 Wait till the light goes oﬀ, then start ironing.

instructions

diagrams

1 temperature control

2 light

3 water inlet

4 cover

5 spray nozzle

6 steam control

7 soleplate

8 steam vents

9 reservoir

10 clip

11 heel

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Russell Hobbs 18616-56 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,91 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Russell Hobbs 18616-56 Manual

Product: