489790
2
Zoom out
Zoom in
Previous page
1/48
Next page
2
Read the instructions and keep them safe. If you pass the appliance on, pass on the instructions
too. Remove all packaging, but keep it till you know the appliance works.
A IMPORTANT SAFEGUARDS
Follow basic safety precautions, including:
1 This appliance must only be used by a responsible adult. Use and store the appliance out of
reach of children.
2 Don’t put the motor unit in liquid, don’t use the appliance in a bathroom, near water,
or outdoors.
3 Don’t open the appliance till the blades have stopped moving.
4 Take great care when handling the blade unit.
5 Unplug before dismantling or cleaning.
6 Route the cable so it doesn’t overhang, and can’t be tripped over or caught.
7 Don’t leave the appliance unattended while plugged in.
8 Don’t fill with anything hotter than you can comfortably handle (i.e. liquid temperature
below 40°C).
9 Don’t try to chip ice, don’t try to chop raw meat, and take great care with the blades.
10 Don’t run the motor for more than 1 minute at a time, then leave it for a minute to cool down
before using it again.
11 Don’t fit an attachment or accessory other than those we supply.
12 Don’t use the appliance for any purpose other than those described in these instructions.
13 Don’t operate the appliance if it’s damaged or malfunctions.
14 If the cable is damaged, it must be replaced by the manufacturer, its service agent, or
someone similarly qualified, in order to avoid hazard.
household use only
C PREPARATION
1 Sit the motor unit on a dry, firm, level surface, near a power socket.
2 Lower the bowl over the spindle.
3 Locate the tabs under the bowl in the slots in the base.
4 Turn the bowl about 15mm clockwise to lock it in place.
5 Hold the blade unit by the plastic part.
6 Lower the blade unit over the spindle in the bottom of the bowl.
7 Rotate it till it drops to the floor of the bowl.
C PROCESSING
8 Put the food in the bowl.
a) Don’t process hard foods – i.e. anything you can’t cut easily with a kitchen knife.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Russell Hobbs 18531-56 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Russell Hobbs 18531-56 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info