Manual Russell Hobbs 12051-56 (page 3 of 48) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

509765

Zoom out

Zoom in

1/48

12 Lower the cover on to the motor unit.

13 Align the pointer ) on the cover with the open padlock U, push the cover down, then turn it

to align the pointer ) with the closed padlock L.

C IN USE

14 Hold the mill over the food.

15 Press the switch to start the motor, release it to stop.

16 Don’t run the motor for more than 1 minute, or it may overheat. After 1 minute, switch oﬀ for

at least 3 minutes, to let the motor cool.

C CARE AND MAINTENANCE

17 Wipe the outside surfaces with a clean dry cloth.

18 Don’t let the appliance get wet or damp.

19 Don’t put any part of the appliance in a dishwasher.

C BULB REPLACEMENT

20 Turn the whole mill upside down.

21 Grip the plastic surrounding the bulb, and pull it straight up.

22 Fit the new bulb in its place.

C BATTERY CARE

23 Check that the batteries are ﬁtted correctly – there’s a guide inside the battery compartment.

24 Don’t leave dead batteries in the appliance, they may leak caustic gunge over the product

and surroundings.

25 Unless you’re using the batteries regularly, it’s best to remove them altogether.

H ENVIRONMENTAL PROTECTION

To avoid environmental and health problems due to hazardous substances in electrical

and electronic goods, appliances marked with this symbol mustn’t be disposed of with

unsorted municipal waste, but recovered, reused, or recycled.

diagrams

1 switch

2 cover

3 front

4 rear

5 motor unit

6 batteries (not supplied)

7 spindle

8 peppercorns

9 grinder

10 bulb

11 base

12 underneath

13 knob

14 coarse

15 ﬁne

instructions

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Russell Hobbs 12051-56 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,14 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Russell Hobbs 12051-56 Manual

Product: