705905
3
Zoom out
Zoom in
Previous page
1/96
Next page
3
Read the instructions, keep them safe, pass them on if you pass the appliance on.
Remove all packaging before use.
IMPORTANT SAFEGUARDS
Follow basic safety precautions, including:
This appliance can be used by children aged from 8 years and above and
persons with reduced physical, sensory or mental capabilities or lack of
experience and knowledge if they have been given supervision or instruction
concerning use of the appliance in a safe way and understand the hazards
involved. Children shall not play with the appliance. Cleaning and user
maintenance shall not be made by children without supervision.
Check the sieve for damage every time you use the appliance. Do not use the
appliance if the rotating sieve is damaged.
Always disconnect the appliance from the mains supply socket if it is left
unattended and before assembling, disassembling or cleaning.
If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualied persons in order to avoid a hazard.
Don’t put the motor unit in liquid.
Don’t use ngers or cutlery to push food down the tube – only the pusher.
Don’t open the latches till the sieve has come to a complete stop.
Don’t use the appliance for any purpose other than those described in these instructions.
Don’t use accessories or attachments other than those we supply.
Don’t operate the appliance if its damaged or malfunctions.
HOUSEHOLD USE ONLY
PARTS
1. Pulp container
2. Speed control
3. Drive shaft
4. Spout
5. Separator
6. Sieve
7. Lid
8. Latch
9. Pusher
` Diswasher safe
BEFORE USING FOR THE FIRST TIME
Remove any packaging material and labels.
Wash the pulp container, sieve, lid, food pusher and separator and in warm, soapy water.
Rinse and dry.
Wipe the motor base with a damp cloth.
Place the appliance on a dry, rm, level surface, near a power socket.
ASSEMBLY
1. Fit the separator onto the motor unit.
2. Put the sieve into the separator and press it down onto the drive shaft.
3. Fit the lid over the separator.
4. Fit the latches on each side over the rim of the lid (Fig A)
5. Press the latches inwards until they lock (Fig B).
6. Fit the pulp container over the right hand edge of the lid then push the bottom inwards
(Fig C).
7. Fit the pusher into the tube.
GB
DE
FR
NL
IT
ES
PT
DK
SE
NO
FI
RU
CZ
SK
PL
HR
SI
GR
HU
TR
RO
BG
AE
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Russel Hobbs 24741-56 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Russel Hobbs 24741-56 in the language / languages: All languages as an attachment in your email.

The manual is 1,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info