Manual Rupes TV10 (page 8 of 30) (English, German, Dutch, French, Italian, Spanish)

489929

Zoom out

Zoom in

1/30

PARTS OF THE TOOL

1 - Identification plate

2 - ON-OFF switch

3 - Switch locking button

4 - Tool body

5 - Rear handle

6 - Mechanical speed change (TR102)

7 - Side handle collar seating

8 - Side handle with collar

9 - Side handle with collar lock-nut

10 -Chuck

11 -Mobile ring

12 -Fixed ring

13 -Motor ventilation slots

PRELIMINARY CHECKS

Before starting-up the tool, ensure that:

- the packaging is complete and does not show signs of having

been damaged during storage or transport;

-the tool is complete; check that the number and type of

components comply with that reported in this instruction

booklet;

-the power supply and socket outlet can support the load

reported in the table and that indicated on the tool identification

plate reproduced and explained on page 11.

ASSEMBLING THE TOOL

ASSEMBLING THE SIDE HANDLE

Place the collar in the handgrip (8) in the seating (7) and, by tigh-

tening the wing-nut (9), to fix the handle in the best position for

the work to be carried out.

FITTING DRILL BITS

1. Keep the chuck still using the fixed ring (12) and unscrew the

body using the mobile ring (11) until the jaws are sufficiently

open to hold the drill bit;

2. lock the drill bit by rotating the upper part of the chuck in a

clockwise direction;

3. check that the bit does not rotate off-centre.

MECHANICAL SPEED CONTROL

TR102

Adjust speed control (6) bearing in mind that:

- low speed = low rpm and high torque;

- high speed = high rpm and low torque.

The speed must be changed with the machine stopped,

otherwise irreparable damage will be caused to the motor-

chuck drive mechanism.

REPLACING DRILL BITS

Follow the reverse procedure to that described in the “FITTING

DRILL BITS” chapter.

BEFORE STARTING THE TOOL

Ensure that:

- the power supply conforms with the characteristics of the tool;

- the power supply cable and plug are in perfect condition;

- the ON/OFF switch works properly though with the power sup-

ply disconnected;

- all the parts of the tool have been assembled in the proper man-

ner and that there are no signs of damage;

- the ventilation slots (13) are not obstructed.

STARTING AND STOPPING

- Starting

: push the switch (2) so that it enters the housing in the

rear handle. To lock the switch in the on position, press the lock

button (3) at the same time.

- Stopping

: release the switch. If locked in position, keep pres-

sing until the lock is released.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Rupes TV10 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,97 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Rupes TV10 Manual

Product: