489927

Rupes TE21P Manual

7
Zoom out
Zoom in
Previous page
1/30
Next page
PARTS OF THE TOOL
1 - Identification plate
2 - Compressed air on/off lever
3 - Speed control (optional)
4 - Safety lever
5 - Tool body
6 - Compressed air connection with 1/4” thread
7 - Toolholder pincer
STARTING UP
Before starting-up the tool, ensure that:
- the packaging is complete and does not show signs of having
been damaged during storage or transport;
- the tool is complete; check that the number and type of
components comply with that reported in this instruction
booklet;
- the available compressed air production and distribution plant
is capable of satisfying the requirements reported on the
tool’s identification plate reproduced and explained on page
11.
ASSEMBLING THE TOOL
Assemble the compressed air connection by screwing it into its
seating .
COMPRESSED AIR CONNECTION
The tool is supplied without the compressed air connection;
the user can use either a quick release coupling or hose type
connection according to his needs, purke they have an hole of
air passing mm. 8. In the latter case the air line must be fixed to
the nozzle by a hose clip.
FITTING TOOLS
Insert the tool shank into the pincer then tighten it using the
operating key.
BEFORE STARTING THE TOOL
Ensure that:
- the speed control is in MAX position;
- the compressed air feed line and connection are in perfect
working order;
- the start lever is working properly. This must be done with the
air supply switched off;
- all the components of the tool are mounted correctly and do
not show any signs of damage.
STARTING AND STOPPING
- Star
ting: push the control lever forward towards the body
of the tool and keep it pressed. When moving the control
lever it is necessary to move the safety lever at the same
time topermit the control lever to move.
- Stopping:
release the control lever.
TEST RUN
Start the tool and check that there are no unusual vibrations
and that the sanding disk is firmly held.
Otherwise switch-off the tool immediately and eliminate
the cause.
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rupes TE21P at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rupes TE21P in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info