8
TECHNICAL DATA ENGLISH
TYPE TA151
WORKING PRESSURE bar 6
AIR CONSUMPTION l/min 360
SPEED CONTROL YES
ROTATION RPM 7.000 ÷ 11.000
ORBITAL DIAMETER mm 5
DISC PAD DIAMETER mm 150
DISC PAD TYPE VELCROED FACED
EXTRACTION SYSTEM YES
WEIGHT Kg 1,5
8
SAFETY AND ACCIDENT PREVENTION INSTRUCTIONS
The safety and accident prevention instructions are reported in
the “SAFETY INSTRUCTION” booklet which forms an integral part
of these documents; the operating instructions indicate the addi-
tional information required specifically for use of the tool.
Never use the tools without the safety guards.
Any operations carried out on the tool must be effected with the
tool disconnected.
Before starting the tool, ensure that it is held tightly and not in con-
tact with the work surface.
The electric tool must be connect to a suitable dust extraction unit
and applicable safety regulations must be observed if dusts dan-
gerous to health are likely to occur during sanding.
Due to risks that may arise during sanding, we recommend the
constant use of P.S.D. (personal safety devices such as gloves,
headphones, goggles, face masks, etc.) according to laws in for-
ce to prevent or reduce accident probability.
Warning! Carry out the lubrication process outlined on page 10,
in the maintenance paragraph. The appliance continues to work
for a few seconds after it has been switched off.
CORRECT USAGE
The sanders are designed for sanding wood, plastic, composite
materials, paint/varnish, filling material and similar materials.
Metal and materials with an asbestos content must not be proces-
sed with these tools.
The tools must not be damp nor operated in a damp environment
for electrical safety reasons.
The tools may only be used for dry sanding.
Make sure the work piece is sufficiently fastened.
In the event of improper use, the user is fully liable for any dama-
ges or accidents.
GENERAL WARNINGS
The tool must be connected to a suitable dust extraction system (not supplied).
