Manual Rupes SM43N (page 9 of 31) (English, German, Dutch, French, Italian, Spanish)

489915

Zoom out

Zoom in

1/31

PARTS OF THE TOOL

1 - Identification plate

2 - ON/OFF switch

3 - Switch locking button

4 - Handle

5 - Protective shield

6 - Spindle

7 - Cylindrical ring nut

8 - Grinding wheel lock nut

9 - Motor ventilation slots

10 - Auxiliary handle

11 - Abrasive disk backing pad

12 - Abrasive disc conical lock nut

13 - Wrenchs (17 mm spanner and pin spanner)

STARTING UP

Before starting-up the tool, ensure that:

- the packaging is complete and does not show signs of having

been damaged during storage or transport;

- the tool is complete; check that the number and type of com-

ponents comply with that reported in this instruction booklet;

- the power supply and socket outlet can support the load repor-

ted in the table and that indicated on the tool identification plate

reproduced and explained on page 11.

ASSEMBLING THE TOOL

Fit the protective shield in its housing on the body of the tool and

tighten the collar using the using the socket head screws sup-

plied.

The shield must be mounted around the handle.

Tighten the auxiliary handle (10); it can be positioned either on the

left or right of the tool body.

FITTING ABRASIVE WHEEL

GRINDER

- Insert the cylindrical ring nut (7) on the spindle (6);

- fit the grinding abrasive wheel on the spindle;

- screw on the grinding wheel lock nut (8) and tighten it using the

pin wrench, preventing the spindle from moving using the 17

mm spanner.

FITTING ABRASIVE DISC PAD

SANDER

- Insert the backing pad (11) on the spindle (6);

- mount the abrasive disc;

- screw on the conical ring nut (12) and tighten it using the pin

wrench, preventing the spindle from moving using the 17 mm

spanner.

BEFORE STARTING THE TOOL

Ensure that:

- the power supply conforms with the characteristics of the tool;

- the power supply cable and plug are in perfect condition;

- the ON/OFF switch works properly by following the instructions

written in the “Tool start-up” chapter, though with the power

supply disconnected;

- all the parts of the tool have been assembled correctly and are

not damaged;

- the ventilation slots are not obstructed.

STARTING AND STOPPING

- Start

: press the locking button (3) on the upper section of the handle,

then the switch lever (2). To lock the spindle shaft in order to be able to

carry out a continuous machining, press the switch lever (2), then the

locking lever (3) and hold it down while releasing the switch lever (2),

so that is firmly maintained in position.

- Stop

: release the switch lever or, if this is blocked, push the lever in or-

der to release the locking button.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Rupes SM43N in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,27 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Rupes SM43N Manual

Product: