489863

Rupes GL080 Manual

7
Zoom out
Zoom in
Previous page
1/30
Next page
8
TECHNICAL DATA ENGLISH
8
GENERAL WARNINGS
SAFETY AND ACCIDENT PREVENTION INSTRUCTIONS
The safety and accident prevention instructions are reported in the “SA-
FETY INSTRUCTION” booklet which forms an integral part of these docu-
ments; the operating instructions indicate the additional information re-
quired specifically for use of the tool.
Never use the tools without the safety guards.
Any operations carried out on the tool must be effected with the power
supply disconnected.
Before starting the tool, ensure that it is held tightly and not in contact
with the work surface.
The tool must always be used with the protective shield mounted.
The abrasive wheel must be correctly mounted and tightened.
Make sure that the sparks caused during work do not create danger by
hitting people or inflammable substances.
Hazardous dust may form during use regulation safety devices for
personal protection and observe safety norms valid for the processed
work material.
During tool use pieces of the wheel of work material may break off
causing serious injuries to people or things: remember to always use all
personal protection devices (such as gloves, headphones, goggles, etc.)
according to laws in force to prevent or reduce accident probability.
Warning! the appliance continues to work for a few seconds after it has
been switched off!
SPECIFIC USE
Before use make sure that the wheels or cutters operating characteristics
are compatible with those of the machine and that they are not broken or
worn.
Make sure that the wheels or cutters are assembled, handled and stored
with care according to the manufacturer's indications.
Do not use and adapter system for cutters with tangs other than those
specified.
Do not use the wheel cutting edge as grinder.
Make sure the work piece is sufficiently fastened.
In the event of improper use, the user is fully liable for any damages or
accidents.
TYPE
GL040 GL040E GL080 GL080E
PROTECTION CLASS II II II II
OPERATING VOLTAGE 230 V-50 Hz 230 V-50 Hz 230 V-50 Hz 230 V-50 Hz
ABSORBED CURRENT 5,3 A 5,3 A 5,3 A 5,3 A
ABSORBED POWER 1100 W 1100 W 1100 W 1100 W
ROTATION RPM 4.500 2.000÷4.500 9.500 5.000÷9.500
DIAMETER OF THE DISC HOLDER mm 115 115 - -
WHEEL DIAMETER mm - - 125 125
SPINDLE THREAD M 14 M 14 M 14 M 14
WEIGHT Kg 1,9 1,9 1,9 1,9
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rupes GL080 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rupes GL080 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info