Manual Rupes DD142 (page 12 of 33) (English, German, Dutch, French, Italian, Spanish)

489853

Zoom out

Zoom in

1/33

TEST-RUN

Start the tool and check that there are no vibrations or off-centre tool

rotations.

Otherwise, switch off immediately and eliminate the problem.

ALLOWABLE TOOLS

Retail drill bits:

- Ø maximum 10 mm (DD122);

- Ø maximum 13 mm (DD142);

- screwdriver inserts.

BATTERY REPLACEMENT (A)

- Press the eject buttons (8) while pulling the battery down until released;

- insert the new battery making sure that voltage corresponds to machine vol-

tage and that the rib on the battery side corresponds to the groove on the

battery housing.

MAINTENANCE

BATTERY CHARGER

Store in a cool, clean and dry place. Systematically clean the exterior with a

dry cloth.

BATTERIES

Warning: do not leave the batteries in the tool when not in use: remove them

from their housings and place them, not fully used

, in a cool and dry place. Af-

ter charging batteries, unplug the battery charger from the electrical mains,

remove the batteries and store them as described above. Rechargeable bat-

tery life is limited: the number of times a battery can be charged depends on

many factors (type of use, battery age, etc.): when the battery is dead (can no

longer be recharged) dispose according to the indications found in this book-

let in the instructions on “Specific battery safety regulations”.

DRILLS

Warning:The battery must be removed from the machine for all maintenance

operations!

On completion of the work, or when necessary, remove any dust from the tool

body with a jet of compressed air.

Apart from cleaning operations, the user must not perform any ulterior main-

tenance.

Contact Authorised service centres if necessary.

ELECTRICAL SAFETY-LOW VOLTAGE

DRILLS-BATTERY CHARGER

See declaration of conformity

STATIC RADIO INTERFERENCE PROTECTIVE SHIELD

Machines are built in accordance with the static radio interference prevention

and elimination effects according to regulations EN55014-1 + EN55014-2 +

EN61000-3-2 + EN61000-3-3.

NOISE LEVEL

The noise level produced is 79 dB (A), measured according to regulation

EN 23744

Warning: wear suitable hearing protections! (see warnings).

MEAN ACCELERATION VALUE

The mean square value of acceleration is less than 2,5 m/sec

measured ac-

cording to regulation UNI EN 28662.

GUARANTEE

All tools manufactured by RUPES Spa are guaranteed for 12 months from

the date of purchase against fabrication and material defects.

All tools must be used only with RUPES original accessories and spare

parts: we refuse all responsibility for damages or accidents caused by

non-observance of this rule which will also cause the termination of the

guarantee.

The guarantee will no longer be valid if the instructions contained in this

booklet are not followed, if the tool is used for purposes other than that for

which it is intended, if it is dismantled, interfered with in any way or dama-

ged due to neglect.

The guarantee will be made valid by filling-in the form on the

inside back cover of this instruction booklet.

If the tool is found to be defective or malfunctions, it should be returned

carriage free in one piece in its original packing together with the guaran-

tee certificate to the manufacturer or to one of the Assistance Centres li-

sted in the appendix to this booklet.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Rupes DD142 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,33 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Rupes DD142 Manual

Product: