Manual Rupes BR109AE (page 9 of 34) (English, German, Dutch, French, Italian, Spanish)

489841

Zoom out

Zoom in

1/34

PARTS OF THE TOOL

1 - Identification plate

2 - ON/OFF switch

3 - Speed control

4 - Dust extraction flow control

5 - 29 mm Ø suction port

6 - Auxiliary handle

7 - Heat protection

8 - Dustproof wheel

9 - Velcro faced pad

10 - Motor ventilation slots

11 - Heat protection fixing screws

12 - Spanner

13 - Disc pad fixing screws

STARTING UP

Before starting-up the tool, ensure that:

- the packaging is complete and does not show signs of having been

damaged during storage or transport;

-the tool is complete; check that the number and type of

components comply with that reported in this instruction booklet;

- the power supply and socket outlet can support the load reported in

the table and that indicated on the tool identification plate

reproduced and explained on page 11.

ASSEMBLING THE TOOL

- Position the heat protection (7) on the gearbox such that the holes

for mounting the handle are aligned with those on the gearbox;

- screw in the auxiliairy handle (6); the handle can be mounted on the

left or right of the tool body;

- if the tool is to be used without the auxiliary handle, the heat shield

must be fixed in place using the screws provided (11).

MOUNTING THE PAD

1. Place the backing plate (9) with the screw in the centre (13) (fig. 1);

2. slightly turn the backing plate (9) until it is fixed to the screw as

in (fig 2);

3. tighten the screw using the supplied wrench (12) (fig. 3). Do not

tighten the backing plate screw if it is in the wrong position (fig. 4);

4. to remove, follow the same procedure in reverse order.

FITTING ABRASIVE PAPER DISCS

Press the abrasive paper disc into the pad ensuring that the holes in

the paper coincide with extraction holes in the pad.

BEFORE STARTING THE TOOL

Ensure that:

- the power supply conforms with the characteristics of the tool;

- the power supply cable and plug are in perfect condition;

- the ON/OFF switch works properly though with the power supply

disconnected;

- all the parts of the tool have been assembled in the proper manner

and that there are no signs of damage;

- the ventilation slots are not obstructed;

- the tool must be connected to a suitable and efficient aspiration device.

STARTING AND STOPPING

- Starting

: push the slide of the switch (2) forward; if the tool is to be

locked in the ON position, apply pressure to the front part of the

slide switch at the same time.

- Stopping

: release the slide or, if locked in position, apply pressure to

the back part of the switch and allow it to return to the stop position.

TEST RUN

Start the tool and check that there are no unusual vibration, no

dismatching of the abrasive paper disc.

Otherwise switch-off the tool immediately and eliminate the cause.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Rupes BR109AE in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,75 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Rupes BR109AE Manual

Product: