8
TYPE
BA215N BA225N
PROTECTION CLASS II II
OPERATING VOLTAGE 230 V-50 Hz 230 V-50 Hz
ABSORBED CURRENT 4,6 A 4,6 A
ABSORBED POWER 950 W 950 W
ROTATION RPM 10.000 8.500
WHEEL DIAMETER mm 115 125
WHEEL SPINDLE THREAD M 14 M 14
WHEEL SPINDLE STOP YES YES
WEIGHT Kg 1,8 1,8
TECHNICAL DATA ENGLISH
8
GENERAL WARNINGS
SAFETY AND ACCIDENT PREVENTION INSTRUCTIONS
The safety and accident prevention instructions are reported in
the “SAFETY INSTRUCTION” booklet which forms an integral part
of these documents; the operating instructions indicate the addi-
tional information required specifically for use of the tool.
Never use the tools without the safety guards.
Any operations carried out on the tool must be effected with the
power supply disconnected.
Before starting the tool, ensure that it is held tightly and not in con-
tact with the work surface.
The tool must always be used with the protective shield mounted.
The abrasive wheel must be correctly mounted and tightened.
Make sure that the sparks caused during work do not create dan-
ger by hitting people or inflammable substances.
Hazardous dust may form during use regulation safety devices for
personal protection and observe safety norms valid for the
processed work material.
During tool use pieces of the wheel of work material may break off
causing serious injuries to people or things: remember to always
use all personal protection devices (such as gloves, headphones,
goggles, etc.) according to laws in force to prevent or reduce
accident probability.
Warning!the appliance continues to work for a few seconds after
it has been switched off!
SPECIFIC USE
Before use make sure that the wheels or cutters operating charac-
teristics are compatible with those of the machine and that they
are not broken or worn.
Make sure that the wheels or cutters are assembled, handled and
stored with care according to the manufacturer's indications.
Do not use and adapter system for cutters with tangs other than
those specified.
Do not use the wheel cutting edge as grinder.
Make sure the work piece is sufficiently fastened.
In the event of improper use, the user is fully liable for any dama-
ges or accidents.
