531510

Ruby Fires Serra Manual

11
Zoom out
Zoom in
Previous page
1/32
Next page
Installation Serra & Corato:
• Remove the packaging and check if all parts of the fireplace are intact, if not please
contact your dealer.
• The bioethanol fire has to be mounted stable and steadily, using the supplied wall-
brackets
• Carefully decide where the fire is to be mounted
• The wall-bracket is to be fixed horizontally. Use the
supplied level.
• Attach the wall bracket to the back wall, the
supplied screws and plugs. The supplied plugt
can be used for stone or concrete walls.
• Hang the fire on the wall-bracket
• Place the security hook on the bottom of the fire,
use the supplied material.
• Only mount the fire to a vertical, steady, stable
and fireproof wall
Installation in the surround:
• Remove the packaging and check if all parts of the fireplace are intact, if not please
contact your dealer.
• Remove the L-shaped brackets on the sides of the fireplace.
• Place the insert into the opening of the surround. Attach the L-shaped brackets back
to the sides of the insert, press firmly to the surround before securing the straps.
• Attach the 2 connectors provided to the corners of the burner with the provided
bolts. The bolts are attached on the bottom side. Then place the glass shield in the
connectors and tighten the hex bolt by hand.
• Make sure the surround is levelled
Make sure the fire is levelled horizontally and that the back of the fire is placed parallel to the
wall behind it (vertically).
Due to the production of heat around the fire, the backwall can change in colour over time.
Installation of the glass screens:
The glass screens should be mounted on the burner. To do this please use the enclosed
conectors + bolts. This will prevent the airflow pushing against the back wall. It is also used
to control the slide on top of the burner. With two hands you can move the slide forwards
and backwards. If the flames are still striking against the back wall please close the burner
and contact your dealer
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ruby Fires Serra at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ruby Fires Serra in the language / languages: English, German, Dutch, Français as an attachment in your email.

The manual is 2,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info